Quantcast
Jump to content

Recommended Posts

Posted

simply i got 2 different answers from local dealers,,1 says use 4stroke oil for wet clutch,,the other says it dont have wet clutch,but,can use wet clutch oil..the guy i bought it from used regular 20-50 castrol,what oil do i use,,ive asked on 3 forums,thats why i asked if n e one had one so i can find out what they use,,obviously it must work for them

Posted

You should to use four stroke ATV oil that has additives in it.

p15.png

Valvoline® 4-Stroke ATV Motor Oil

Specially formulated to provide peak ATV performance and protection.

  • Extreme Condition Performance - Thermally stable formula maintains proper lubrication to protect engines under extreme conditions.
  • Wet Clutch Protection - Optimal frictional characteristics for high torque, smooth shifting and proper protection of the wet clutch.
  • Corrosion Resistance - Advanced additives help protect against water, deposits and other corrosive materials to keep engines clean.
  • Maximum Horsepower - Proper additive balance for maximum horsepower.
  • Minimal Wear - Increased anti-wear agents minimize wear from metal-to-metal contact.
  • Shear Stability - Shear stable viscosity improvers better resist oil film breakdown.

* Adjusted your thread title a bit, and added issue.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • By opnea
      Where do yall ride at in South Florida other than the MX track on Krome Ave?
    • By HighPlainsIT
      My son's trying to get a 2003 Prairie 360 running. Over a year ago, he'd rebuilt the carburetor using a SHINDY 03-112 rebuild kit from JT Cycle & ATV, and it was working fine; however, when it wouldn't run recently, he took the carb apart and the jet needle was rusted in place. He cleaned that up as good as possible and replaced the jet needle with the old one that wasn't rusty. Now, he can only get it to start about 1 out of 5 tries, and when it does start, it won't run unless the choke's on. The spark plug's good and is sparking. It has compression. Any ideas on what he should try next or look into?
×
×
  • Create New...