Quantcast
Jump to content

1998 Honda 300 ex chain adjustment

hockersmith898

By hockersmith898
in Honda ATV Forum

 Share

Recommended Posts

Stoopidbot1 Grand Master

Stoopidbot1

Posted
Posted

On the very back of your swingarm there are 2 bolts. You need to loosen those. Next to the sprocket(on the inside) there should be some notches that you can put a small pry bar(I use a large allan wrench) and you physically rotate that back. I have 4 bolts but it should be similar to my 450, here are some pics.

DSCF5071.jpg

DSCF5072.jpg

Raptor8 Proficient

Raptor8

Posted
Posted

why is this stuff posted on my home page if all the post mongers are gonna get there first?

YOU have SUPERMODS, enjoy them before they burn out like a road flare at a traffic accident.

Even the most generous person has a limit.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • jimbo69
      2009 800 help
      By jimbo69
      my outlander 800 sometmes starts and does good ouker times starts but will not idle .any one else have same problem?
       
    • Cj Winds
      2009 Honda Rancher TRX420FA with shifting problems
      By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • Mikey509
      2000 honda recon battery charging
      By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • Maxg_57
      Help?
      By Maxg_57
      How come i cant download manuals i was told this is a good spot to find one for my lt230s quadsport.
    • Mikey509
      2000 honda recon fourtrax 250
      By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...