2000 Yamaha Grizzly 600 No Start

[kimt]

my 600 grizzley started ideled for a few mins then quit, now will turn over but no fire or kick to start, can anyone help me please???? We think it might be the timing does anyone know anything about that maybe how to set it

Edited May 17, 2010 by kimt

[outlander560]

so your motor will crank and try to turn over...but it wont run?

[kimt]

yes it will crank and turns over np just wont start

[outlander560]

are you getting a spark??

[Ajmboy]

Is your choke working?

* Adjusted thread title to include manufacturer and issue.

[kimt]

yes the choke is working and yes it has spark, it almost sounds like it might be flooding itself, but we dont think so, like i said we seem to think it might be timing?

[outlander560]

alright yea i agree it would prob lead to the timing if everything else is doing what its supposed to...best thing to do is to get a shop manual. they will lead you step by step, on where to look, what the timing should be at, and how to fix it if its the problem.

[DirtDemon]

Check the flywheel key, if it sheared off then your spark timing will be off.

[Ajmboy]

It sounds like it's not getting fuel. Was this quad sitting around for a while? Have you checked the fuel petcock? Or were you riding it and it just would not start back up...?

[kimt]

Yes this bike was use everyday, we started it let it run to warm up for a min or so and it just quite to never start again, it will turn over and roll over like crazy just will not kick to start.

[DirtDemon]

Did you check the flywheel key yet?