Quantcast
Jump to content

Recommended Posts

Posted

Help!

I have a 2002 Polaris Trailblazer 250. It has a nasty habit of dying out after about 10-20 mins of riding. I just replaced the coil and went for a test ride and again it died on me. If you wait about 5 mins it will start right up and go for another 10 mins. Does anyone have any idea on what else could be causing this? if it was the stator would it not start up at all? Any help anyone can offer is appreciated

Posted
yes it does not want to start. Unsure on the fuel piece.

You are going to have to check and see if it is getting fuel when it dies out or not. It's either fuel or ignition related.

Posted

I have a 2001 and had a problem where it would start and run long enough to give me a long walk back to my truck to rescue it. By the time I got back it started right up. I thought I flooded it so I took it out again and the same thing. I checked ignition spark fuel and everything in between. Last thing I checked was the compression and that was the problem. Had enough to start and run, but as it got hot and expanded it lost enough to keep it from running. Rebuilt the top end and it is fine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...