Quantcast
Jump to content


2002 Polaris Trailblazer 250 Dies out after 10 mins

ltb52

By ltb52
in Polaris ATV Forum

 Share

Recommended Posts

ltb52 Newbie

ltb52

Posted
Posted

Help!

I have a 2002 Polaris Trailblazer 250. It has a nasty habit of dying out after about 10-20 mins of riding. I just replaced the coil and went for a test ride and again it died on me. If you wait about 5 mins it will start right up and go for another 10 mins. Does anyone have any idea on what else could be causing this? if it was the stator would it not start up at all? Any help anyone can offer is appreciated

Link to comment
Share on other sites
wylde1 Grand Master

wylde1

Posted
Posted

I have a 2001 and had a problem where it would start and run long enough to give me a long walk back to my truck to rescue it. By the time I got back it started right up. I thought I flooded it so I took it out again and the same thing. I checked ignition spark fuel and everything in between. Last thing I checked was the compression and that was the problem. Had enough to start and run, but as it got hot and expanded it lost enough to keep it from running. Rebuilt the top end and it is fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Spritee1
      2006 polaris sportsman 500 ho issues with the unit like the belt is slipping
      By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • justent_88
      94 Kawasaki Mojave 250 - No spark, Very confused
      By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • Johnfj44
      2010 Polaris RZR Replacement Seat
      By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • Slitzer
      Polaris Sportsman 570 6X6 2017 DTC "520 285 2"
      By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • bighoss
      2013 Polaris Outlaw 50 - Fuel Problem
      By bighoss
      i got my son new outlaw 50 a few weeks ago and we went rideing yesterday and while we were riding it died and it took me like 10 min to get started back and it died agen when we got close to truck so i pulled it back took the plug out it looked like it was drop in a bucket of gas took the air filter out and the ait box was full of gas also got home it started rite up today i started it it starter up but was blowing what look like water out of the exholst let it idel for a lil bit did not die but as soon as hit the gas and let off it will die what does that sound like i thnk i going to take it back to dealer and tell them to fix it as it is under warrenty but would like to know what it could be first

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...