Quantcast
Jump to content

Recommended Posts

Posted

I have a Kazuma Panda 110 auto trans, no reverse. I am considering a motor change. Has anyone changed out the Kazuma motor for a more reliable brand...ie. ( honda or Briggs & Straton).?

Posted

Never done it, but I am sure that swapping in a Honda motor would be easiest because most of those Chinese quads use old Honda designed motors. However, where there is a will there is a way and I believe that you can put anything in there if you have the skills and recources to do so. You could put an old air cooled ATC 250R motor in there and have yourself a genuine suicide machine.

  • 4 years later...
Posted

I recently put a kdx220 motor in my 150falcon. Now I am trying to upgrade my suspension. On e you get the stock motor out there is plenty of room to put any kind of motor you can dream up in there.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Maxg_57
      Is anyone still active on this club
×
×
  • Create New...