Search the Community
Showing results for tags ' kazuma'.
-
my buddy gave me a kazua falcon 90 that he had let sit for 2 years. i cleaned fuel systems took apart and cleaned carb ,ohmed out all wires, safties, cdi, etc... it is so inconsistant its weird. sometimes it will crank good idle good and run till it warms up and then die and not start back up. sometimes it wont even start. sometimes it will crank but not idle good for nothing.. sometimes it wont crank or do anything... also the carb seems to have no response to any adjustments. olny thing is i have not replaced the plug.. ps thank for lettin me be a member yalls site kicks as* my kids and i are just getting in to wheeling so i hope to have a big one for myself soon an help would be appreciated thanks
-
I need to find a seat for a kazuma 250 cougar? I think its a 2002 to. How can i find that year it is? Where can i find a manual on how to take it apart? Thanks
-
Ok Im new here. I was given a cougar 250 and i put a new carb on it and it will idle great but anything above low rpms spits and sputters. also is this thing suppose to have a fuel pump or just gravity feed from petcock?
-
Can anyone please tell me where i can get a good wiring diagram for my Kazuma Falcon 150 cc atv. I have tried numerous web sites looking. I have found some, but the picture was horrible couldn't even read it. Thanks, Craig.
-
Ok Im new here. I was given a cougar 250 and i put a new carb on it and it will idle great but anything above low rpms spits and sputters. also is this thing suppose to have a fuel pump or just gravity feed from petcock?
-
Hi all, I don't recall the year but I have two Kazuma Coyotes 90cc for my kids. One is fine the other one slips in forward gear to the point it won't run. Before I tear into this anyone have an idea of gear box adjustment or what type this is? Direct drive, band type? Any advice is appreciated since the kids are not very patient taking turns with one running go kart. Thanks for the time.
-
I have a kazuma 250. It was running the other day. When i was idling it to take it out it just stopped and would not start backup. . Has spark and fuel. Even when i spray starter fuel in the carb it wont kick off.
-
does any one know the color of the wire going to the headlight/kill switch that supplys the power from the stator to the switch. I am wanting to get power from a switched 12v source.
-
I have a Kazuma Panda 110 auto trans, no reverse. I am considering a motor change. Has anyone changed out the Kazuma motor for a more reliable brand...ie. ( honda or Briggs & Straton).?
-
Ok I recently put a extra 220 kfx motor I had laying around into my sons 150 falcon. After a little tinkering the thing is a absolute beast and a blast to ride. Now to list why I started this thread. I want 4lug wheels and aftermarket suspension and a few other things like that. I'm assuming that since I ain't found the first aftermarket part for this thing that there is no aftermarket support for them if I'm wrong please correct me. Usually when you run into this issue other riders have tried switching parts off other quads and have a pretty good idea what parts can be interchanged so if yall have a list like that could i possibly have access to it? Really what I want is wider so if there is a Japanese preferably front end and axle that I could get so I can get this thing out to around 50" wide I would be a happy man. Any information you provide will be greatly appreciated. Thanks in advance.
- 1 reply
-
- 150 or kdx
- 220
-
(and 3 more)
Tagged with:
-
Hi everyone. I am hoping to find a service manual or exploded view diagram for a Lincoln 110cc Automatic Mini quad. Or any advice ect. Something seems to be locking up inside. However the quad has sat for a while. I have lubed EVERYTHING and think the piston does go up and down when I move the flywheel clockwise, but it locks going forward. Thanks and if photo,s or any more info is needed please let me know.
-
I dont know what size the factory battery was. The kart is out of town and i cant measure it.The battery i have is bad and its smaller than the factory size. i looked it up on Kazuma parts.com and lots of places but they dont list them model specific
-
Hello i have recently purchased my kids a second hand Kazuma as a beginners bike, i would love to add a speedometer and a RPM tacho if possible for a little added safety so they dont flip it but i really have no idea where to start, sorry if sounds silly, .....how and where do i connect the speedo to(I mean electronics wise) and also how and where do i wire/connect the tacho to? Thanks in advance Allan
-
My friend Was welding a different stop brake light on my falcon 250. And he welded my vin plate in half burning more than half of the digits. How can i get those again??I did find the engine serial numbers,but when I looked it up search came up as nothing,,Im new to quads but learning fast,I just need pictures of all cooling hoses go,including all the extra hoses that cover the Kazuma Falcon 250.Info on the differential would be nice,A good and affordable site to order parts from.etc, Mods of any kind. im off for a month and want to tackle this project for my 2 boys. Any hard to find info would be highly appreciated. Thanks in ahead to everyone .
-
i recently bought a second hand falcon 150 automatic it was going fine till the wire harness started to ment all the wires ive bought a new wire harness now but the problem is with the new one the connections are different can anyone help
-
I have a problem with a PZ19 carb (Kazuma 110). I have disassembled and cleaned it and still have a very rich running engine (black plug). I can't find any info for this carb such as jet sizes, float height and needle position. The main jet now is #71 and float is level with bowl edge. Any info would be helpful Thanks for any help. Cooter
-
Bought a kazuma 110 yesterday with carb issues, needs new front sprocket, and a ignition switch which is no big deal. Got the quad near dark, got from a friend so didn't think it would be a problem. Long story short their is a lot of things wrong he didn't tell me about including the rear wheels are locked up and wil not move, read on other forums that the rear diff was more than likely screwed up. Was wondering if anyone knew where I could get a rear diff rebuild kit for a kazuma because I cant find one online, Does it have to be a kazuma rebuild kit? how much do you think a mechanic would charge to rebuild? Any other suggestions would be appreciated greatly!
-
Hi all, I have a Kazuma Falcon 110 That wont shut off with either the keyswitch or the killswitch when it is running, both the switches work great before starting and running, I have replaced the keyswitch, regulator , cdi, and coil and still nothing, Just keeps running on and on,,lol, I know most people have just the opposite problem and not starting, Thanks in advance.
-
so iv been looking for new ball joints for my kazuma falcon 150. they are practically non existant apart from buying entire new suspension arms, i swear my hair is going white looking for these damn things. is there any suggestions as to alternative ball joints i can use or does anybody know if there is a company who stocks them?
-
hi im buy my kazuma cougar 250 and im dont know how much horsepower that have.can someone help me ?
-
Does anyone have the repair manual or a parts diagram for the Kazuma 90 Falcon? My email is [email protected]. Thanks!
-
Hey guys, Just looking for a wiring diagram for the above.....just need to check wiring cos seem to not be getting spark. changed plug, and coil. Battery is also new.
-
I am Hoping someone can Point Me in The Right direction, I am looking fo a Good Dealer for a Kazuma ATV. I bought a Builder and I am In need of Parts. Can someone HELP!!!!! Uncle Buck...
-
Need help finding a wiring diagram for this bike Kazuma Falcon 90 . I cant seem to find it anywhere.