Search the Community

Strangest thing ever seen I have a 2009 Theo Theo one 10 cc automatic, but it has no gear selector at all. The casting of the engine block has blank areas where shifter goes no way to put it in neutral. Anybody ever heard or seen this? When I crank it, it wants to lunge forward except the emergency brake on the handlebars are set.

View File 110cc Four Stroke ATV User Manual 110cc Four Stroke ATV User Manual originally submittted by @oxidized_black Submitter Ajmboy Submitted 11/13/2022 Category Other ATV  

Hi thanks for adding me on here, i bought a none running 110cc thundercat quad and i have spark, fuel, compression but it wont start anyone have any ideas as im stumped

I have a 110cc atv not sure of a brand its a Chinese model. I put on a new harness with cdi solenoid and all those. I have put a new starter on, and carburetor. I bypassed the start button cause it was just making the solenoid click. with the new button switch the atv will crank but not start. I tried to jump the solenoid and it did nothing. I am stumped. also I noticed gas leaking from the carburetor and when I took the filter off there was gas in it. I cleaned the carburetor and nothing was stuck or clogged. can someone help me out.

Hi everyone. I am hoping to find a service manual or exploded view diagram for a Lincoln 110cc Automatic Mini quad. Or any advice ect. Something seems to be locking up inside. However the quad has sat for a while. I have lubed EVERYTHING and think the piston does go up and down when I move the flywheel clockwise, but it locks going forward. Thanks and if photo,s or any more info is needed please let me know.

I dont know what size the factory battery was. The kart is out of town and i cant measure it.The battery i have is bad and its smaller than the factory size. i looked it up on Kazuma parts.com and lots of places but they dont list them model specific

Daughters quad started blowing oil. Pulled top end, found piston and sleeve marred. Replaced piston and cylinder, upon verifying TDC using my thumb to hold pressure, notice loss of pressure against thumb while hearing a "bubbling" sound from inside the head. 1) While I had compression loss from old piston/cylinder. I did not notice compression loss from head. 2) All Top End gaskets are new. Head gasket is in excellent condition. 3) Head and Cylinder mating surfaces were prepared, cleaned & slightly sanded to ensure no foreign objects & smooth surface. 4) Did not use any type of extra gasket material (RTV, etc) on head gasket. Although, head gasket came with some sort of (rtv style) seal. Link to show example of this head gasket: Cylinder Head Gasket for Coolster Mountopz ATVs - $3.95 I am beyond frustrated... What am I missing?

Was about to change the oils on the TaoTao atv. Its an automatic, no gears or only one. Problem is that I only found one place to fill oil instead of two. Could it be that it use the same oil for the engine and autogearbox? If it like that what oil should i use? Transmission or 4-strook?