Quantcast
Jump to content

Recommended Posts

Posted

Good aftrenoon

Looking for assistance or hint in how to resolve the issue I started to encounter a few months back

I do have issue when starting cold (and I do not mean because it is minus 1). Recently once the Quad has not ran for 24 hours, it is always hard to start. Lately ÙI started to remove the air filter and sprayed a thin mist of gas at which point the engine starts with no hiccups. Thru start and stop for the reminder of the day, no problem at all

the dealer tells me that it is probably an issue with the engine and that should have valves rechrome. Compression tests are within standard, no problem at all with the battery, the is no evidence of oil comsumtion (either thru leak or burning). I purchased new and have been very rigorous on maintenance .

Any hint as to what else I can check at this time:confused:

Many regards

from quebec, Canada

Posted

Valves rechrome??? I think you have a classic case of a dealer trying to feed you a big spoonful of B.S. Valve adjustment maybe. I do know that your battery can be a problem when starting fuel injected ATVs. If it isn't fully charged, it won't start because there isn't enough power to run the FI. If you manually add fuel, this would get the motor started and once running the alternator will produce enough power to run the ATV. I think that your problem is that once it has sat for a day, the battery loses enough of a charge to make starting difficult. I would try putting the battery on a trickle charger overnight and see of you still have the problem. If this helps, but the battery won't hold a charge on its own, then you may just need a new battery.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Joeguy
      After i did my rebuild it seems to not want to shift well. I think the cable is alright, and when it does shift its nice and solid. I have to basically use my hand to shift and i have to pull or push it very far, like max travel, to get it to shift. I also tried adjusting the clutch set screw. Any ideas where to go next, or maybe i should just grab a new cable to try.
    • By Dsluder
      I am having an issue with a hs500. I bought it broken and have been trying to get it running. It seems to be starving for fuel. If I put my hand over the intake it will crank but will not run for very long because I'm not able to get the correct airflow with my hand. The things I have done so far are. Replaced the fuel pump, fuel filter, mass airflow sensor, idle air adjuster, fuel injector, cleaned the throttle body, replaced the ecu, and still the same issue. I notice the injector does not spray when removed from the head. I dont know if that is common. 
       
      I am out of ideas on what to do next. I have removed the fuel line from the injector and it is getting plenty of fuel. If anyone has an idea on what could possibly be the issue I would be happy to try anything at this point.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By wilmpie
      hi everybody
       
      I have a kymco mxu 250 automatic from 2006 250 cc  that keeps going forwards or backwards when i shift backwards or forwards an then shift to neutral .
      if i shutdown the motor and push the quad and restart then its in neutral and don't go forwards or backwards, i already checkt if my motor is running good stationairy .
       
      what can it be or what can i do to fix this?
      thanx in advance
      p.s. Sorry for my bad english it's not my first language.
       
       
       
×
×
  • Create New...