2007 Suzuki Vinson blowing ignition fuse HELP!!!!!

[dcr31686]

I have a 2007 Suzuki Vinson 500, Semi-Auto, 4X4. I was riding it last winter in a couple inches of snow and a little ice. It ran perfect for a few hours and then starting a slight backfire for about 15 minutes I noticed the over heating light was on so I got ready to shut it off and before I could it shut off by itself. I let it cool down for about 3 hours then i went to restart it I got nothing, the display screen was completely blank and only the back light was on. I then checked the fuses and noticed the ignition fuse was blown I believe it was a 10 or 15 amp fuse so I replaced it then started it up it ran for about 5 minutes then cut off and blew the fuse again. I tried several times throughout the day giving it about an hour in between each start. After about 5 trys i put a 30 amp fuse in and still did the same thing. I let it sit for a couple days to dry everything out and tried again same thing blew the ignition fuse after about 5 minutes. So I then took apart all the electrical connections cleaned them and dried them and then once again tried and blew the ignition fuse. I do not know what could be causing this and havent been able to find any others with this issue. If anyone could be of any help I would greatly appreciate it. Thanks

Donald Roberts

[DirtDemon]

The first thing you need to do is check all the wiring and switches for damage, or loose connections. It is likely that you have a dead short in the circuitry somewhere. A multimeter will be helpful when trying to chase down electrical problems like this. You may also want to try testing your ignition components, if you have a service manual, there will be some direct resistance tests you can perform on some of the components. If you don't have a service manual, I would strongly recommend purchasing one.

[cailloux]

I have a 2007 Suzuki Vinson 500, Semi-Auto, 4X4. I was riding it last winter in a couple inches of snow and a little ice. It ran perfect for a few hours and then starting a slight backfire for about 15 minutes I noticed the over heating light was on so I got ready to shut it off and before I could it shut off by itself. I let it cool down for about 3 hours then i went to restart it I got nothing, the display screen was completely blank and only the back light was on. I then checked the fuses and noticed the ignition fuse was blown I believe it was a 10 or 15 amp fuse so I replaced it then started it up it ran for about 5 minutes then cut off and blew the fuse again. I tried several times throughout the day giving it about an hour in between each start. After about 5 trys i put a 30 amp fuse in and still did the same thing. I let it sit for a couple days to dry everything out and tried again same thing blew the ignition fuse after about 5 minutes. So I then took apart all the electrical connections cleaned them and dried them and then once again tried and blew the ignition fuse. I do not know what could be causing this and havent been able to find any others with this issue. If anyone could be of any help I would greatly appreciate it. Thanks

Donald Roberts

y have the same probleme and i am search the problem and my problem is the botom of the 4x4 wen is on 4x4 the fuse burn i am check the wiring and 1 wire near of the motor to engage the 4x4 is ground to the frame i am repair this and its ok