Quantcast
Jump to content

Recommended Posts

Posted

I have a 2000 ds 650. Sometimes it will start sometimes it wont. when it does start it will only run for about 10 seconds and then it dies just like you hit the kill switch. Even if you hold the throttle at a higher rpm it sounds great till it dies. im sure it has to be electrical can anybody give me some feedback

Posted

Get a repair manual and start testing ignition components, my best guess would be that you have a bad CDI box, but it could be alot of different things so you would be best off testing everything and checking for bad connections before you start buying parts. Good luck, these types of problems can be tough.

Posted

thanks josh. I got a shop manual im gonna start going thru all the tests with a voltmeter. it is definatly electrical. It wouldnt even start tonight so I pulled the plugs and it would only spark one time when i hit the start button. Thanks for the feedback. I just wish they didnt make stuff so complicated. Whatever happened to the good ole days when it wouldnt start youd either pull it or coast start it and you was good to go.

Posted

Check your battery, They have to have a good strong one to run. Don't over charge it no more than 2anp. If it's not that then it could be the voltage reg. Check voltage at the battery. If it's over 14+ it could be over charging.

  • 7 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...