Quantcast
Jump to content

Recommended Posts

Posted

I have a 2000 ds 650. Sometimes it will start sometimes it wont. when it does start it will only run for about 10 seconds and then it dies just like you hit the kill switch. Even if you hold the throttle at a higher rpm it sounds great till it dies. im sure it has to be electrical can anybody give me some feedback

Posted

Get a repair manual and start testing ignition components, my best guess would be that you have a bad CDI box, but it could be alot of different things so you would be best off testing everything and checking for bad connections before you start buying parts. Good luck, these types of problems can be tough.

Posted

thanks josh. I got a shop manual im gonna start going thru all the tests with a voltmeter. it is definatly electrical. It wouldnt even start tonight so I pulled the plugs and it would only spark one time when i hit the start button. Thanks for the feedback. I just wish they didnt make stuff so complicated. Whatever happened to the good ole days when it wouldnt start youd either pull it or coast start it and you was good to go.

Posted

Check your battery, They have to have a good strong one to run. Don't over charge it no more than 2anp. If it's not that then it could be the voltage reg. Check voltage at the battery. If it's over 14+ it could be over charging.

  • 7 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...