Quantcast
Jump to content

Recommended Posts

Posted

I agree with the guys. they now have ethanol shield. I found it at our local wal- mart store. I don't see where it would help at this time but after you get it running you might want to use it.

Posted

What additive did you use. I use sta-bil and it's worked for me. I add it to my gas when ever i fill my container up. I run my lawn mower or what ever I put it in for about 15mins. and it's always been good to go when I go to use it. My quad doesn't get a rest but I do turn the fuel off and let it run till it quits running if it's going to be setting for a few weeks but thats rare.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Jason39
      I’m having a issue with my choke when its on it runs fine when I cut the choke off the atv cuts off went to take the carburetor off and saw the choke plunger broke at the nut to screw it in could this be my issue? Do I just need to buy a plunger kit and put it on? I took the carburetor off and cleaned both jets anyway just to make sure and it’s still having issues staying on
         
    • By Starsat
      The choke lever doesn't stay in position on my 2001 Yamaha Kodiak.  The model is YFM 400.  I have to hold the lever to the choke position manually for some reason.  Any Ideas as to why?
    • By Its-always-something
      Have a 1998 AC 300 2x4, Just installed a new carburetor. Engine starts easy but the choke RPMs are very hi and take along time (5-10 mins when cold out). After engine has warmed up choke releases and it idles and runs fine., It does no have an electric choke. The choke lever is never used and it seems like an auto choke? Long story short, how can I lower the choke rpm levels?
       
      Also, carb came with a spare145 jet, not 100% sure what is installed. Could this impact choke RPMs?
       
       
      Any help and information greatly appreciated.
    • By Parham
      My quad will not start when temperature is below 40 F.  Starts and runs great in warmer temperatures.  My choke doesn't seem to be working...should the plunger be "IN" (down) or "out" (up) to actually "Choke"?  Not the little choke lever...the actual plunger in the carb?
    • By Ragsy
      Recently got a 95 KLF300 and have been fixing a lot of electrical issues and finally got it running. It ran good for a day then went to start it the next and it was already done for and not starting. Found that the plug had been fouled and replaced that and now it runs. The problem I have though is that It will only idle with just a little choke on. Will not start with no choke and when choke is applied it revs itself to extremely high RPMs. Before I adjusted the air mixture screw it would only run if the choke was OFF and afterwards it only runs with choke. If I try to give it any throttle it immediately bogs down and will stall out. Starts back up like nothing happened. Timing is dead on.
      I have a brand new Chinese carb, old owner didn't have OEM on it. What could be the problem?
×
×
  • Create New...