Quantcast
Jump to content

Trailer size

Grillmastertoo
 Share

Recommended Posts

Grillmastertoo Apprentice

Grillmastertoo

Posted
Posted

I'm looking to purchase a trailer to haul a Suzuki 750 KQ (4'x7' footprint) and a utv(5'x10' footprint)

I've been considering the following specs:

7'x16' size

Wooden floor

Drop down rear entry gate or ramps for the utv

Drop down side entry gate it ramps for the KQ

15" tires

Tandem but may consider single axle

Does anyone have strong opinions on if the frame is tube or angle iron?

And are there any other considerations I should throw into the mix?

Thanks

Sent from my DROID X2 using Tapatalk

swampcat07 Grand Master

swampcat07

Posted
Posted (edited)

I bought a construction trailer. It has alot higher ground clearance. When I take the two Bikes or One Bike and SXS I can load them from the tail. I can also fit 2 quads and one SXS easily. I think I can fit four or 5 quads easily if I just side load. The longer trailers handle awsome but I have a hard time fitting into some places. My Trailer is 6.5 X 19 Deck. Just leave a foot or so longer so you can tie down the SXS.

40557_124064857641916_100001152063858_127496_6754103_n.jpg

Edited by swampcat07
Spelling
marioweldinginc Veteran

marioweldinginc

Posted
Posted

If its a covered trailer like landscaping trailers then its usually thin gauge channel and angle. We replace quite a few fronts because they overload them and break the tounge A frame just infront of the wheels. BUT ... the equipment they haul is heavier than a utv and atv combined

Sent from my SGH-T959V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • WeeBee
      Advice on ATV Trailer Brand?
      By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • kellogs
      minivan vs. trailer
      By kellogs
      Hello,

      Pondering on what would be better in terms of practicality vs. money spent. The ATV will be a small 125 cc Chinese brand that can be fully contained in a small euro-van (VW Caddy)

      1. Load the ATV on a trailer while riding it.
      Need to buy the ATV + hook + trailer (+ ramp?) and work on the car to mount the tow hook, of course.
      Perhaps I can find a trailer than can do this -
        Side question: what sort of mechanism that allows such loading is that, or, in other words, what sort of trailer am I looking for ?

      2. Load the ATV inside the mini-van.
      Need to buy the ATV + ramp.
      Also need to push it inside as riding it won't be possible. The thing will weight some 100 kilos, about 1.5 times my body weight. I shall go for the longest ramps that will fit into the van, but still, not sure I can push it in and pull it out of the van without cursing my life - if at all doable.

      What do you guys think ?
    • jay41198
      1988,suzuki quadrunne LT 4wd cdi box work around
      By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • Mreoiwerk
      UTV seat covers
      By Mreoiwerk
      Hey, I'm thinking of upgrading my stock sport glide seat with memory foam as a bit of a project. I've seen how some guys use the heavy-duty padding inside the water repellent UTV seat cover fit Polaris Ranger XP 1000 crew for their UTV projects and wanted to try something similar for my bike.
      Has anyone done a DIY foam upgrade and have any tips? What sort of foam density would people recommend, and how easy is it to remove and refit the factory seat cover over the new padding? Any advice gratefully received! 
    • mehim
      NSFW / Looking for fun ideas for our 2nd Quad Runners event at our nudist campground
      By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...