Quantcast
Jump to content

Muzzy exhaust

marioweldinginc

By marioweldinginc
in Honda ATV Forum

 Share

Recommended Posts

marioweldinginc Veteran

marioweldinginc

Posted
Posted

Does Muzzy make an exhaust for the 400Ex? I heard a Muzzy on a 750 grizzly and a KFX700 and the sounded great. I know those bikes are twin cylinders but what a great sound. If Muzzy doesnt make an exhaust for the EX, whats a comparable setup. My white bros slip on doesnt cut it anymore

Sent from my SGH-T959V using Tapatalk

marioweldinginc Veteran

marioweldinginc

Posted
  • Author
Posted

I would rather know if it would sound good plus free up hp. I would assume it would be a custom build. Ive seen a few muzzy slipons mated to factory ex head pipes sold on ebay but id rather have one thats made for it. Is there another exhaust thatsounds like a muzzy and free up ponies?

Thanks i will email him anyway maybe he could send me in the right direction

Sent from my SGH-T959V using Tapatalk

quadnut20 Grand Master

quadnut20

Posted
Posted
I would rather know if it would sound good plus free up hp. I would assume it would be a custom build. Ive seen a few muzzy slipons mated to factory ex head pipes sold on ebay but id rather have one thats made for it. Is there another exhaust thatsounds like a muzzy and free up ponies?

Thanks i will email him anyway maybe he could send me in the right direction

Sent from my SGH-T959V using Tapatalk

Mario We dynoed a ex with a slipon pipe and then we switched out to a full exhaust ! Nice difference in hp gains with full system !!

quadnut20 Grand Master

quadnut20

Posted
Posted
Mario We dynoed a ex with a slipon pipe and then we switched out to a full exhaust ! Nice difference in hp gains with full system !!

Does NY have a sound limit ? Colorado has a 96dbl limit so it limits what pipe I bought :no:

marioweldinginc Veteran

marioweldinginc

Posted
  • Author
Posted
Mario We dynoed a ex with a slipon pipe and then we switched out to a full exhaust ! Nice difference in hp gains with full system !!

I currently have a White Brothers E2 slipon. I am also looking into a 500cc big bore kit and machining.

Sent from my SGH-T959V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • marlon smith
      1990 Kawasaki Bayou 300 Intake and Exhaust Pop
      By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • Olchap
      1989 Yamaha big bear 350 front brake cylinders
      By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • Louznmemind
      2007 Yamaha Grizzly 350 carb mixture screw
      By Louznmemind
      (Question is at the end if you want to skip my blabbering) I got this unbelievably well taken care of Grizzly 350 in for a carb clean, it belongs to an elderly couple that bought it brand new in '07. Apparently whoever has been doing their oil changes for them never checked the air filter..
      Obviously it got debris in the carb, it would still run but only idle with slight choke. I've taken it apart and cleaned it, have new o rings, gaskets, etc. As far as the mixture screw is concerned, I'm assuming I obviously need to remove the plug. I'm mainly a lawn equipment guy, I've worked on slide carbs in the past but never an unmolested one with the plug still intact. I hate to mess with it as the carb had very little debris but I'm sure the o ring needs to be replaced at minimum. Finally, the question: what's the best way of removing the plug? I DO NOT want to mess up this carb..



    • Louznmemind
      '07 Yamaha grizzly 350, 2wd gear oil
      By Louznmemind
      Can someone please tell me the fill point on the drive axle? '07 Grizzly 350, straight rear drive, not independent. Thanks 

    • Ajmboy
      Yamaha Grizzly 660 New Seat
      By Ajmboy
      My 2004 Yamaha Grizzly 660 seat is a mess, torn up, cracked, and I have been duct taping it for a while.  I bought new vinyl for $35 and need to do it one day. A new seat used to be well over $250 but now its under $100 so I couldn't resist. I got it on ebay with a 10% off coupon for $85.05 plus tax. https://www.ebay.com/itm/146040022154
      In case anyone is looking for a new seat for their Yamaha Grizzly 😁

       
      I saw it on Amazon as well for under $100

       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...