Quantcast
Jump to content

Recommended Posts

Posted

On a cold start with the choke on full, the bike will start and run but only for a few seconds. Then she dies. I can use the throttle with or without the choke to keep it running but she won't run past a few seconds with the choke on alone. It will stay running after I play with the throttle for a few seconds. Just doesn't seem right. Any ideas???

Posted
On a cold start with the choke on full, the bike will start and run but only for a few seconds. Then she dies. I can use the throttle with or without the choke to keep it running but she won't run past a few seconds with the choke on alone. It will stay running after I play with the throttle for a few seconds. Just doesn't seem right. Any ideas???

What year and have you done any mods to it ?? How does it run when its warm ?

Posted

Runs perfect when it's warm. I have a new old stock yoshimura team suzuki pipe i just put on but it did it with the stock pipe too. Everything else is stock size ( Hot rod crank and bearings, new piston, rings and gaskets all stock size). I bought the bike as a project and what a project it turned out to be. The piston and ring must have just been done because the honing marks were still there in the cylinder. Same thing I was going to do before I checked the conrod small end. I used all new parts anyway. Checked the valves, all good, cleaned the carb. Runs great other than the choke thing and it starts first time all the time so far, I just have to use the throttle.

Posted
Runs perfect when it's warm. I have a new old stock yoshimura team suzuki pipe i just put on but it did it with the stock pipe too. Everything else is stock size ( Hot rod crank and bearings, new piston, rings and gaskets all stock size). I bought the bike as a project and what a project it turned out to be. The piston and ring must have just been done because the honing marks were still there in the cylinder. Same thing I was going to do before I checked the conrod small end. I used all new parts anyway. Checked the valves, all good, cleaned the carb. Runs great other than the choke thing and it starts first time all the time so far, I just have to use the throttle.

What year is it ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...