Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

i just bought a houser steering stem for my raptor and was wondering if i had to put new oil seals on .

Share this post


Link to post
Share on other sites


i just bought a houser steering stem for my raptor and was wondering if i had to put new oil seals on .

Oil seals? :confused:

Share this post


Link to post
Share on other sites

they help...but if u just make sure to re-oil them and they are lubed up, you should be fine. just make sure you tighten the stem to the bearing plate well or u will feel a small unusual "tink" feeling when u move the bars back and forth

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Rich1028
      Looking at maybe getting A Raptor 700R  in 2020

      Was looking to see of anyone in here has one,had one,can you tell me your likes,dislikes,and so on!
    • By Venom
      Hi All,
      I did a total restoration on a 2003 Yamaha Raptor 80. Rebuilt the engine and tranny.. Started it up today and it runs great. Took it for a ride and the transmission worked perfectly. Adjusted the carb a little more and went for another ride. It ran awesome, pulled into the workshop shifted into neutral ( Neutral light came on) and shut off the bike. went to roll it and noticed she would not roll. Turned on the key and neutral light was on... After some troubleshooting I found that she is in first gear with the neutral light on and will not shift into neutral... It seems to up shift fine into 2nd and 3rd and then back down to 1st. I am hoping somebody can shed some light on what is happening... Thanks for any help...

    • By Venom
      Hi, All

      I started this project a while ago.. I have decided to make one thread I can continuously update..

      So , here we go. I got this Raptor 80 in really bad condition.. Rear end frozen, Engine toast, tires dry rotted, tons of rust..etc.. They admitted they beat on it very hard.

      Since they do not make these with a drive shaft anymore I decided to restore it from top to bottom..

      These are photos of when I got it home.

      Next up, the tear down..



      First, I needed to tear it down and determine if the rear end was still good... As we all know... That is where it would be cost prohibitive to restore if it is trashed..

      Got it completely stripped down and I lucked out... The rear Drum brake was caked solid inside with dried mud. That was causing the rear end to lock up. Took off the rear brakes and the rear end spun perfectly smooth.

      Once I got it all stripped apart I needed to take the finish off all the parts. I am going to be powder coating the frame and many parts.. Once the finish is off each part it will need to be sandblasted to white metal .. The guy I use for powder coating gives me a hefty discount if I bring the parts to him ready to go.

      You could just sand blast, but that would take a long time to get the finish off. First I used Aircraft Paint Remover.. That stuff is pretty toxic Goggles and Resperator are required. That quickly gets you down to the metal... Then you can sand blast to white metal pretty quickly...


      I had another thread I had started about a problem with the tear down... It has some great info .... here is the link... It is about removing the frame bushings. ....
       
      https://www.quadcrazy.com/atvforum/topic/14209-raptor-80-frame-bushings/?tab=comments#comment-104702
    • By John Dunn III
      Just bought a LT 230 anything I should watch for. It runs and drive good. Just don't want no surprises 
    • By turner_clint77
      Just have a couple questions 
      first does anyone else have an issue with the right hand tie rods coming loose 
      second does anyone else’s power steering making a weird sound at times 
  • Similar Tagged Content

    • By commander777
      can anyone tell me if power steering is on my utv?just got it and don't have any manuals w/ the side by side.it doesn't feel like it but was wondering.also,loud noise from underneath seems like.ive read a few posts where people have complained about the noise as well and the heat and dust coming up from the cockpit area.what u guys think.any advice.thanks
    • By Tim-ANC
      Just got back from a 3 day hunting trip over nasty terrain. Last day did a 53 mile round trip and the return with Caribou meat. The steering bump on these is pretty bad. Came home with bruises on my palms.
      Anyone know of a good steering stabilizer device? I`m looking at the one in the link. Seems awesome, but the price!
      Precision Racing Products ATV Steering Stabilizer damper
    • By Tim-ANC
      My friend has 2007 Honda TRX680FA Rincon. He wants to know if there is a power steering mod available for this? I don`t see anything in the service manual indicating it might have been a stock option.
    • By Markdb
      FOR SALE: 2011 Triton trailer model ATV128 Side/rear loading, has full size spare and extra tiedowns, about 5000 miles, I have had it since April 2011, looking for $ 1,900 best offer, no trades, I am not in a hurry to get rid of it so no low balling, trailer is located Smithtown NY 11787, arrangement can be made to meet in Pottsville PA area. You can send me an email if you want pictures [email protected] or call cell 516-242-9701This is an excellent quality aluminum trailer. I am selling it as my wife and daughter are not into the sport like they thought they would so no need for this trailer, will also have a 2011 Yamaha Grizzly 550 Power steering available soon. ATV128 side loading ATv trailer from Triton Trailers!
      http://newyork.craigslist.org/lgi/mcy/3430099658.html
    • By marioweldinginc
      Anyone know where i could get ccp stabilzer? I saw them on ebay and now they are all gone. Anyone have any suggestions?
      Sent from my SGH-T959V using Xparent Blue Tapatalk 2
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...