Quantcast
Jump to content

Recommended Posts

Posted (edited)

So i took the carb off my 94 suzuki 250 quadrunner today and when i tried removing the pin that holds the float one of the arms broke still didn't get the pin out. Would it be ok to use jb weld on this just wondering because it might be in the gas but it did break off at the base any ideas would be great. Already get ebay but only for a 94 will a carb fit from another year?

8a8y9uze.jpg

use2adan.jpg

Sent from my SGH-T989 using Tapatalk 2

Edited by stillsmoken
Posted

Years ago i bought some stuff called gas something or other can't really remember lol. I just worry about it being sumerged in gas but i got to try something

Sent from my SGH-T989 using Tapatalk 2

Posted

looking online jb weld says its soluble before drying with gasoline, but once cured can withstand gasoline. damn, that sucks that that piece broke !! that is something that would just happen to me LOL. i know i was real careful taking that pin out, mine was in tight and i used an awl and hammer and tapped it out. i would probably clean the surfaces really good with some type of acid wash for the best adhesion ...

Posted

I was using a little nail( to lazy to get the right tool) thought it was moving the pin out but just broke the one side. Still have one more carb to clean lol

Sent from my SGH-T989 using Tapatalk 2

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By Yamahahahaha
      I'm in the middle of repairing damage from the chain coming off of this from the previous owner. (I learned this is somewhat common on these for various reasons.)
      What are you guys using to either help keep the chain correct and on the sprocket or guarding your engine in the case that it comes off / breaks?
      Is there an upgraded guard that can bolt around the sprocket in replacement of the currently broken OEM alluminum?

    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
×
×
  • Create New...