Quantcast
Jump to content

Recommended Posts

Posted

Hello, I have a 2001 Warrior 350 that has had its fair share of ignition problems. The last time it was riden was September 2012 and it did not start easily, but did after about 3 minutes of cranking. Fired up fine the rest of the day. Got home, cleaned it off, wouldn't start. Currently, we figired out that the problem I am having is I only get one spark each time the key is turned on, then nothing. Turn the key off and on again and you get one more spark.

I have replaced the stator pick-up coil combo, both test where they should in their ohms, but did come from e-bay and not a reputable company. I have tried the CDI, rectifier, and ignition coil off of my brothers 99 Warrior which starts on the first tap of the start button without fail every time, and same thing on my quad. I then put my CDI rectifier, and ignition coil on his quad and it fired right up, so I knew it wasn't them. I even tried swapping the entire wire harness. I pulled the flywheel, looked at the little half circle metal piece, it is ok. My flywheel is good. I tried the parking break disconnect, but am not 100% sure that I did this correct. Need someone to explain this better.

Still having the same symptom after all of these changes. I am starting to go nuts, :aargh::aargh::aargh:, so I was hoping maybe someone could offer a little help. I am starting to wonder if something is wrong with the stator and it is somehow affecting the spark, like maybe I got a defective part. Only other thing I could think to do is swap my brothers side cover and stator to see if it is that my stator is bad. If it were bad though, why would the ohms test well?

If you have any ideas that I haven't already tried, please let me know. Thanks!!!

  • 2 weeks later...
Posted

I just went thru this with my 2001 warrior had no spark,i replaced pick up coil 1st .Then i would get one spark after i would turn key and switch off .I replaced the whole stator assemblby and it fired right up 55 bucks you cant go wrong.4 days in the mail.Here is link

http://zoomzoompartz.highwire.com/product/1993-1998-yamaha-kodiak-400-2x4-4x4-atv-magneto-stator-coil....Zoom Zoom parts is website click on warrior link.wiring harness is exact match and took about 30 minutes to change out.Use an impact screwdriver and good luck

  • 2 weeks later...
Posted
I just went thru this with my 2001 warrior had no spark,i replaced pick up coil 1st .Then i would get one spark after i would turn key and switch off .I replaced the whole stator assemblby and it fired right up 55 bucks you cant go wrong.4 days in the mail.Here is link

http://zoomzoompartz.highwire.com/product/1993-1998-yamaha-kodiak-400-2x4-4x4-atv-magneto-stator-coil....Zoom Zoom parts is website click on warrior link.wiring harness is exact match and took about 30 minutes to change out.Use an impact screwdriver and good luck

I got the quad started this weekend. The problem was that I bought a cheap stator, and it wasn't until I read that they can come bad if purchased cheap, I went with the one from Rmstator.com. Reliable and has a 1 year warrenty. Sparked like crazy and fires right away now. Thanks for your help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...