Quantcast
Jump to content


New to MX - Dehydration & Jump Questions


jaysun

Recommended Posts

(TL; DR - How do I prevent extreme cottonmouth on the mx track? How to take big jumps without flipping and/or wrecking in any way)

Loving these forums. Getting tons of help, so it's on to my next set of questions.

I've only been riding for a couple months. I got comfortable trail riding and decided to hit a nearby motocross track a couple weeks ago. It made me realize really quickly just how old I am, how fat I'm getting, how out of shape I am and how much being a smoker is stupid.

Anyway, my fatness and out-of-shapeness definitely came into play a lot, preventing me from being able to do more than 2 laps at a time without having to take a break. But even worse than that was the immediate dehydration when I hit the track. I drank a lot of fluids and would always take a big swig before I went but within 1 lap, my mouth is completely dry. By the time I'm halfway through my 2nd lap, my mouth feels like I've done the cinnamon challenge. It's seriously unbearable. At first, I assumed it was because of the dust. However, I have a closed facemask while everyone else is wearing goggles, meaning their face holes are exposed to the dust more than mine and they seem to be doing just fine. Maybe adrenaline can cause this issue? Frankly, it was pretty scary my first time out. My question, I suppose, is if there are ways to prevent this. Maybe chewing gum or using one of those camel pack water things?

My 2nd issue is with jumping. My first lap out, I told myself I wasn't gonna jump at all. I ended up hitting a couple jumps too hard and leaving the ground anyway. After a couple laps out, I was getting brave enough to take maybe 8 foot jumps or so. The problem is, the way the track is set up, an 8 foot jump isn't enough to clear the next ramp and land smoothly. You end up slamming into the peak of the next jump instead. Obviously, these tracks are set up to take the big jump or no jump at all. I'm going back out this weekend and I think I'm gonna try my hand at clearing the bigger jumps. I could use some advice, though. The very first jump I did, I instinctually leaned forward on the way up. I almost ended up on the ground with that one. Once I got used to it a bit, I leaned back on the bike a little, which seemed to work better, but I was still hitting some jumps a little crooked, which made for some fairly rough landings. Any advice on jump posture? I'd prefer not to break any bones out there.

Thanks, in advance for the help, folks.

Link to comment
Share on other sites

When i ride at F1 mx track on LI I can't go for more than 3-4 laps without a break. Each lap is about 2 minutes. Lots of gatorade. The more you ride there the easier it will be.

As for jumping you just need more balls and more practice.

Wylde1 is our resident jumper he'll have some tips for you

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Link to comment
Share on other sites

For hydration, I usually start the day before. I drink a lot of V8 Splash and try to avoid anything with caffeine or alchohol. The V8 loads me up with vitamins, minerals, and antioxidants. The day I ride I drink Powerade. I don't ride at tracks, I only trail ride so I am not sure on your times, but usually my day is about 4 to 5 hrs. That consists of not only some hard trail riding, but I will usually spend about an hour or so digging out some jumps. I will drink a 32 ounce powerade before I ride. After I am done digging I drink a Monster Energy ReHab. When I am done my ride another Powerade.

On to the jumps. I ride by myself. On the trail I look for anything that I can get lift off of. My favortie jump I use, I dug out myself and use some old tires someone was nice enough to leave behind on the lip to give it some extra spring. When I am jumping I start out slow and work my way up. I might hit the jump 10 or 15 times before I even take a hand off of the bars. If I don't like the way it throws me or the way the quad is flying,I maight not even hit a trick that day. This is why I ride alone. Noone wants to watch me dig for an hour and then just keep hitting the same jump. On the track the best way to do it is WATCH THE OTHER RIDERS. What gear are they in? How does their motor sound? Is it pinned or mid throttle? Where are they positioned on the bike? If you can watch someone that is making the jump, get on the track with them. You can follow them at a safe distance, keeping speed with them and if they make it you will too. Also don't be afraid to ask someone at the track. "Hey what gear are you hitting that in?" Most guys are more than willing to help out. Also remember, if the other guy is on a modified 450 and you are on a clapped out 250....well you will need a different gear and a lot more pinned.

Now my most important advise. If you are gonna be jumping, use the proper safety gear. I always wear my helmet, goggles, riding pants, chest protector, elbow pads, knee/shin pads, riding boots, gloves, and a neck collar. This is some footage from my last ride where I did a little sleigh riding on my helmet.

[ame=http://www.youtube.com/watch?v=97_E3k_WyoY]ATV Hits Trees Epic Helmet Cam - YouTube[/ame]

Link to comment
Share on other sites

I greatly appreciate the advice, my friends. When it comes to gear, I really need to step it up. I'm out there in jeans, work boots, a long-sleeved shirt and no armor. Just gloves and a helmet with a facemask.

I've thought about filming the other riders to review how they sit when they hit the big jumps but my girl told me that was creepy. I kinda agree.

My next purchase, though, is definitely body armor. I don't really see the benefit of the pants, boots and jerseys that everyone seems to wear, though. How do special $100 boots protect you? How does a $50 jersey protect you? I guess I just don't get it.

Maybe I'll just try and step up my hydration game. I usually drink a decent sized Gatorade before I get there and then sip on one before I ride. Maybe I need to get up earlier and get more fluids in me. I'll give that a shot this weekend.

And I'll definitely be taking your advice of consulting other riders. I was by myself last time and kept to myself. I suppose it's time I introduce myself and get some help from these guys. There's no shortage of them, that's for sure. I'm just not usually the type to approach strangers to ask them to help me with my newbie issues. That's what the internet is for.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By 86ccord
      Starting this build thread to keep up with everything on my build and hope to motivate someone!
       
      I picked up this 2008 Yamaha Big Bear 250 2 weeks ago. A guy that I hunt with parked it at the hunt club for a year or so before I asked him if he wanted to sell. He said " fill my feeder and throw some batteries in my cameras, and you can have it". Sounds like a deal to me! 
      I have attached some pictures of how it sat under a tarp in the woods and when I got it home and cleaned up a little. 
       
       



    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By utvboard
      2009 HONDA BIG RED
      Honda enters the MUV (multi-use vehicle) market with a side-by-side machine that leapfrogs the competition to set new standards in utility and recreation. With numerous automotive-based technologies, Big Red features a powerful 675cc OHV liquid-cooled PGM-fuel-injected single-cylinder engine and an automatic transmission with three selectable drive modes plus Reverse, front and rear independent double-wishbone suspension, a roomy cab featuring rubber-mounted bucket seats with adjustable backs, and a specially designed, highly durable, tilting cargo bed. A broad selection of Honda Genuine Accessories will also be offered.
      Big Red
      KEY FEATURES
      - Powerful OHV, liquid-cooled, PGM-fuel-injected 675cc, mid-engine design.
      - Automatic transmission with Reverse.
      2009 Honda Big Red in Camo
      - Three selectable drive modes.
      - Front and rear independent double-wishbone suspension for an impressively smooth comfortable ride.
      - Roomy cab and rubber mounted bucket seats with adjustable backs designed to comfortably fit a wide range of body types and reduce fatigue on long drives.
      Specially designed, high durability, tilting cargo bed
      - Specially designed, high durability, tilting cargo bed.
      - Wide variety of Honda Genuine Accessories.
      - Summer 2008 release. More information to come soon!
      Board Message - UTV Forum - Online UTV Community and UTV Forum
×
×
  • Create New...