Quantcast
Jump to content


Bayou KLF300B


Recommended Posts

got a bayou KLF300B i believe it a 88 well i have put a new Carb and i have replaced the CDI/Rectifier/Coil/Spark plug/Reverse Cable/Diff Lock cable i have checked the stator/pickup coil and all the electrical also checked the timing and adjusted the valves it starts up easy but will not run without the choke on and wont rev past 1/4 throttle it also spits alittle gas out the back of the carb i took the new carb apart and everything is clear have tried loosing the exhaust to make sure it wasnt clogged it has a nice strong blue spark anybody have any ideas on what else to check

Link to comment
Share on other sites

  • 2 weeks later...

hi, i have the same bike, i got it as a project bike. i have rebuilt it from the frame up. i had the same stuff going on with mine, i had to replace the timing chain, i had checked the timing and it looked good but the chain was so worn it was still off. when i put the new one on it stoped all the probloms.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By exalrod
      Hello All !
      I am looking for a service manual and wiring diagram for a 2005 50cc Polaris Predator 4 wheeler.
      Could anyone help with this?
    • By pitts
      Just joined so I can download a manual and In the process of making my 10 posts.
    • By bob2007
      Hy there great to be able to communicate with people having knowledge I have a continuous problem with a leaking carburetor and I just saw a small rubber hose detached from the bottom of the carburetor and i cannot find were it should be attached and how the two side should be affixed to the carburetor any suggestions as i cannot find a description plan on it thank you Bob
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By cavry
      Wiring shows White and Brown to solenoid blades. Then a black wire from starter circuit relay to solenoid. I am confused,  where is that black wire supposed to connect?
      Thanks for any help
      Cavry
×
×
  • Create New...