Quantcast
Jump to content

Recommended Posts

Posted (edited)

I got an ac racing bumper still in the box for $50, and i also mod the front struts see my thread. If you add any weight or if you are around 200+ then may want to look into an epi spring set for the struts to stop brake dive and sagging

Edited by Chopermech
Posted

I have never seen to much aftermarket parts on ebay other than cvt belts, exhuast etc. racks & bumpers not too much I did come across a heavy duty bumper with a winch mount built into the bumper may have been made by warn. Rack bags are handy and don't add much weight and a winch comes in handy.

Posted

If you want more power: 12 hole mod the airbox lid, get a muzzy exhaust, dynatek cdi, upp crossovers, and get clutch work from www.vforcejohn.com suspension: everybody makes a rear shock, but elka had the best front spring package, which are now discontinued. Jetting: only use Keihin jets. I designed steering stabilizer clamps sold by atvtrickstuff.com to be used with kfx 450 stick dampeners. Front suspension and steering is the most inhibiting performance factor as it will fatigue the rider long before you run out of atv potential.

Posted

I like my prairie but the Elka's alone cost more than what I gave for my quad. My quad is the 02 Prairie 650 it's a fun quad but a workout as well with the steering. I'm sure the Elka's would help improve the handling but they cost more or as much for what most people pay for the older Prairies & Twin peaks. I'm talking about the Elka struts & rear shock not just replacement springs. I would have to have money to waste too put that much into my Prairie. I've seen some Prairies still selling for 3000bucks so between that cost and what it would cost to do the performance upgrades listed above I think I would just buy a newer quad such as a BF750 and be done. That way your not faced with the short commings of the front strut suspension. Then apply some of the listed upgrades to the bf750 Dynatek cdi, pipe & performance filter.

Posted (edited)

Elka never did make a front strut, just springs. You can get EPI springs which are slightly stiffer and get my nitro charging with thicker fluid for very cheap. Also the steering stabilizer is worth its weight in gold, and a very inexpensive mod.

The nich for the Prairie 700 and BF SRA 650 is sport quad fun and handling with a 4x4 utility front end with winch capability. You can turn them on a dime in the mud trails. IRS will try to compress the suspension and lean over, almost tipping the atv. But if using the atv as a jet ski, then IRS gives you the ground clearance.

Edited by Chopermech
Posted

What I seen must have been struts with the Elka upgrade but they were being listed as Elka struts & also a KVF 700 for sale and it was listed with having Elka struts & Elka rear shock. Even if an Elka strut upgrade is done it still don't make them Elka struts. Thanks for the info about that. I seen them seen the price and never looked at them again. I just took them for what the seller was saying they were. I guess thats away for someone to get mega bucks from the unknowing buyers. I still like the BF750 better. I got a good deal on my Prairie I paid 1,600 for it and I have put a lot of miles on it. I had to replace the frame and gave 300 for an 03 Prairie 650 used the front diff and frame kept a few extra parts around and sold the left overs for 250. And the guy I bought the 03 from said he had a Dynatek F.S cdi he couldn't find the cdi when I bought the quad but said when he finds it he will give me a call so I got the call got the box but then found out it want fit my 02 so I have it listed on craigs list now.

  • 2 weeks later...
Posted

I've got an issue with this bike thats just irritating me. the belt light wont go off and the 2wd and 4wd lights keep blinking back and forth and just wondered if anybody knows how to reset these things or just had any helpful tips? Thanks in advance

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • By HHurks
      Hey everyone, I’m in the middle of purchasing a new Can-Am and it’s been about a decade since my last bike (2007 Grizzly 700). A lot has changed! I got a new Can-Am 850 and have never had racks like these before — all I know is you buy stuff to add on to them.
      So, with that in mind, what are the “can’t-live-without” Can am accessories you run on your Can-Am ATVs for hunting? A gun boot and skid plates seem obvious, but what else do you recommend that really makes a difference?
      Thanks!
       
    • By dink1970
      Explore your Can Am Parts and Accessories from UTV Wolfpack. We have a great selection of products for the Maverick XRS 64 and  Maverick XRS 72 Accessories.
       
      https://utvwolfpack.com/shop/can-am/
    • By Gkb
      Need ideas for all aftermarket accessories for my new atv
    • By 95kingQuad
      As the title says I am on the search for a used OEM 1995 King Quad Carb. I believe it says Mikuni on the side. If you could even help me find info on which carb it is exactly that would be helpful too, or motorcycles/other quads that use the same carb. Thanks!
×
×
  • Create New...