Quantcast
Jump to content

Recommended Posts

Posted

I just bought a 2008 Polaris Phoenix 200. The previous owner told he had not used it in the past 3 years. I pulled the carb and cleaned it with Gumout, put in a new plug, charged the battery and it started. It seems to idle a little fast and it backfires sporadically.

Any thoughts?

I did change the oil and filter, and fluids.

Thanks.

  • 2 months later...
Posted

That could be cuased by a few different things from a mis-adjusted carb to the timing being incorrect. I would start by making sure that the carb is adjusted correctly. Once you know that your carb is correct, Id try adjusting the valves. If it still does it, I would take off the valve cover and check to make sure that your timing chain is set correctly. Hope this helps ya.

Posted

It's most likely still having some carb/fuel issues from sitting for so long

I would keep running it and use the best fuel u can get at the pump in it

And might also use a little fuel system cleaner additive in your fuel ..

If you still have issues after several tanks of fuel u will prolly need to

Clean the carb out again ... Carbs are hard to clean and get every thing out of

Good luck an hope this helps ..

  • Admin changed the title to 2008 Polaris Phoenix 200 Backfires

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Admin
      View File 2013-2016 Polaris RZR 570 service manual
      Download the 2013-2016 Polaris RZR 570 service manual PDF for complete factory repair, maintenance, troubleshooting, and diagnostic procedures. This comprehensive Polaris RZR 570 repair manual covers all major systems including engine service, EFI fuel injection, transmission and clutch repair, drivetrain maintenance, suspension, steering, brakes, electrical troubleshooting, wiring diagrams, torque specifications, and factory maintenance schedules.
      Designed for RZR owners, mechanics, trail riders, racers, and DIY enthusiasts, this factory-style service manual provides detailed step-by-step instructions and diagrams for maintaining, troubleshooting, repairing, and rebuilding the Polaris RZR 570 side-by-side UTV.
      Topics covered include:
      Polaris RZR 570 engine repair
      EFI fuel injection diagnostics
      CVT clutch and transmission troubleshooting
      Drivetrain and differential service
      Suspension and steering maintenance
      Brake system repair
      Electrical troubleshooting and wiring diagrams
      Oil change procedures and maintenance intervals
      Torque specs and factory service data
      Polaris RZR diagnostic procedures
      Popular related searches:
      2013 Polaris RZR 570 service manual PDF
      Polaris RZR 570 repair manual
      RZR 570 wiring diagram
      Polaris RZR torque specs
      RZR 570 clutch problems
      Polaris RZR maintenance schedule
      Polaris UTV factory service manual PDF
      This Polaris factory repair manual is ideal for owners looking to maintain, troubleshoot, repair, or upgrade their RZR 570 for trail riding, recreational off-roading, hunting, racing, and utility use. Whether you're performing routine maintenance or a complete rebuild, this manual provides the factory information needed to keep your Polaris RZR 570 running at peak performance.
      Submitter Admin Submitted 05/30/2026 Category Polaris UTV  
×
×
  • Create New...