Quantcast
Jump to content

  • Do you own an ATV, UTV or SxS? Join our Community Forum!

    QUADCRAZY ATV Community and Forum are FREE to join! We keep our ATV, UTV, and SxS forums clean and user friendly. All first time posters in our forums will have to wait to have their content reviewed and approved. Once your first ten posts are approved, you will no longer need to go through a forum post approval process. To bypass the approval process with immediate access and a NO ADS experience in our ATV, SxS, and UTV forums, consider subsribing to a Premium Membership

2007 Suzuki KQ 700 - Rev Limiter


armandosauceda

Recommended Posts

My atv is bogging down when i push the throttle and have it in reverse, or on high 4wd with the differential lock . It doesnt turn off, it just has a lack of power to get out.

It gets really frustrating when you get in a hole and you cant reverse out or on a hill and you have to do a u turn instead of reverse.

I have full power on low and on high. I have full power on low 4wd diff lock, but not high 4wd with diff lock (sputtering/lack of power).

Can anyone please direct me in the right direction to get this issue fixed. I dont want to start spending money on things that dont need to be fixed.

Thanks.

Link to comment
Share on other sites

I think you have 2 options ...

1st, you can spend 500$ on a new ecm from VDI and that gets rid of all the limiters.

2nd, be aware that doing this mod defeats a safety feature. Also note, the long term effects have not been seen yet. Just so you are aware, do this at your own risk. Now, on to the mod.

To eliminate the forward rev limiter when in diff lock, you need to find the red/green wire, located at pin 15 on the ECM connector, and cut it. I would cut it far enough away from the connector that if in the future you would like to reconnect it, you have enough to do that.

Snipping the Red/Green wire at ECM pin 15 keeps the diff-lock signal from reaching the PCM. The front diff grounds this wire when diff lock engages. The ECM uses this ground signal to severely limit engine power until you hold the override button down with your left thumb. Suzuki designed the bike this way as a safety feature as the machine is harder to control in diff lock.

Here is the ECM connector

75_zpsa6c3f890.jpg

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Admin
      Does anyone use GPS, whether on a device or app to record their ATV trail rides? I have been thinking about a section where our members can upload let's say a .gpx file and share their rides on a google map for others to see where there are riding areas. Not sure if this is something of interest or how much it would be used, so just trying to get an idea.
      Importing routes from files like xml, lmx, tour, freshroute, gpx, kmz, kml
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By GrizzlyRider
      Does anyone own a Massimo MSA450 ATV Quicksand oe see these? It looks like Tractor Supply sells them for $6K. It looks pretty solid, has independent rear suspension. 
      Here's the listing on tractor supply:

       
      Massimo website says
      Massimo MSA 450 - our powerful, single-cylinder, 4-stroke ATV. With 25 horsepower and a top speed of 42mph, this middle-weight ATV offers Hi and Low forward gears, neutral, and reverse, along with selectable 4WD. Boasting 11 inches of ground clearance and 25-inch tires, the MSA 450 tackles any challenge while carrying a load of up to 350lbs and towing up to 800lbs.
      352cc 25 HP EFI 4 stroke engine On demand 4WD with 25 in. AT tires Front & Rear Rack Hand Guards Front Bumper
       
       
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By Gwbarm
      My Yamaha Big Bear shifts through all the gears good, goes into reverse smoothly, but when i go to get out of reverse it takes a lot of effort to get it back to first gear, and even then it does not go very smoothly, have to pull up on the pedal really hard, anyone else ever had this problem. Any ideas would be greatly appreciated.    
  • Similar Tagged Forum Content

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...