Quantcast
Jump to content

Recommended Posts

Posted

A couple days ago I went to start my fourwheeler back up after a short break from riding. When I turned the key, I noticed the neutral indicator light did not light up, even though it was in neutral, and the electric start would not work; it wouldnt even roll over. I have tested the neutral swith by the right foot peg according to the repair manual, and have successfully tested for continuity of the wire from the neutral switch all the way up to the CBI box in front of the steering column. Im really stuck on this one... any ideas? Thanks guys.

Posted

usually it is a bad ground or broken wire in along the way. this sounds like it could be the switch itself. you can take one of the wires (i think there are 2 running to the neutral switch, but 1 is for reverse light i think, if applicable) and ground it out to the frame. now, if you do this, the light will stay on all the time, and you will be able to start it in any gear ...

Posted

Thanks for the reply. I switched the reverse and neutral switch and reverse still works and neutral still doesnt. I checked the switches with an Omh meter and they appear fine. I have traced the wire all the way to the CPI and it appears fine and has continuty. The bike will kick start fine and I can jump across the selonoid and it will engage the starter. i switched out the alarm box with another that I knew was good and there was no difference. I have checked the fuses and they were fine. I removed all the wires in the battery box cleaned all the connectors to no avail. The bike ran fine until I turned it off and tried to restart it a few minutes later and there was no neutral light, with the bike in neutral, so I had to kick start it. I also removed the neutral switch pressed the switch against a ground and still no light. Any suggestions? I have had afew people tell me if it will kick start it cannot be the CPI. Is this true? I am running out of places to look. Thanks for any help.

Posted

hi if already test the wires until batery,,,and continuity in the switch that activate the light on the motor lookfor a small black thing it is a diode quit and probe it with the ohmmeter.... or jumper the connector with an wire piece....luck

Posted
hi if already test the wires until batery,,,and continuity in the switch that activate the light on the motor lookfor a small black thing it is a diode quit and probe it with the ohmmeter.... or jumper the connector with an wire piece....luck

Thank you. I just removed the diode and and jumped across it and the neutral light came on, and the electric start engaged when prompted. Now on to Radio Shack to try to find a new one. Thanks again!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By jeffinotown
      Hey guys and gals. I've been working on my friends 2007 big bear IRS. Unfortunately after 3 different people got their hands on it and only made things worse every time.  After months of finding just crazy problems everywhere. I'm finally at the point we're its almost 100% !!! But I'm getting a short somewhere between the 4xW switch I believe. I managed to by searching the internet like a  fiend, got my hands on an official Yamaha wire harness for the year and make. But I don't have the numbered component list and to be honest. After hours of going through and making everything so it's  easy to reference. If anyone has a picture of the referenced components. I would be forever in your debt. I've spent hours marking up the blown up diagram so it will be easy, for any possible future repairs. Please and thank you. Here's a picture of what i have so far.  Unsealed it in plastic so oil and crap won't spill or get smudged. This damn things worth it's weight in gold.              Thanks Jeff                2007 Yamaha big bear 400 IRS.       YFM40FBW
    • By quadcrazy
      Mud riding is one of the most popular forms of ATV riding, but the wrong tires can leave you stuck fast in deep ruts and swampy trails. Choosing the best ATV tires for mud can dramatically improve traction, steering control, flotation, and overall off-road performance.
      Whether you ride trails, mud parks, swamps, or backwoods terrain, this guide covers some of the top ATV mud tires available today and what makes them stand out.
      What Makes a Good Mud ATV Tire?
      Mud tires are designed with aggressive tread patterns and deep lugs that help clean out thick mud while maintaining traction. The best mud tires usually feature:
      Deep tread lugs Wide spacing for self-cleaning Strong sidewalls Taller tire sizes for added clearance Durable construction for rough terrain 1. Maxxis Zilla

      The Maxxis Zilla is one of the most popular ATV mud tires because it balances mud performance with trail comfort. It is lightweight, aggressive, and performs well in a variety of terrain conditions.
      Why Riders Like It
      Excellent mud clean-out Lightweight design Smooth trail ride Available in many ATV sizes Best For: Trail riders who also spend time in mud.
      2. ITP Cryptid

      The ITP Cryptid is designed for serious mud riding with deep tread lugs and strong sidewall construction. It provides excellent traction in deep mud while remaining durable on rough trails.
      Features
      Deep aggressive tread 6-ply durability Strong side bite traction Great for lifted ATVs Best For: Deep mud and swamp riding.
      3. Outlaw 2 ATV Tires

      The Outlaw 2 has become a favorite among hardcore mud riders thanks to its massive lugs and impressive pulling power in thick mud.
      Pros
      Extreme mud traction Large tread design Excellent forward bite Popular in mud parks Cons
      Rougher ride on trails Heavier than trail-oriented tires Best For: Dedicated mud machines and mud bogs.
      4. STI Out & Back Max

      The STI Out & Back Max offers a solid balance between aggressive mud performance and everyday trail comfort.
      Highlights
      Durable sidewalls Great traction in loose terrain Smooth handling Long tread life Best For: Utility ATVs and hunting machines.
      5. SuperATV Assassinator

      The Assassinator is built for extreme mud riding and features huge paddle-style lugs capable of digging through the nastiest swamp conditions.
      Features
      Massive tread depths Extreme mud traction Available in oversized setups Designed for hardcore mud riders Best For: Extreme mud builds and dedicated swamp riders.
      Choosing the Right Mud Tire Size
      25-27 Inch Tires
      Great for stock ATVs Less drivetrain strain Better acceleration 28-30 Inch Tires
      Balanced performance More ground clearance Popular for trail mud riding 32+ Inch Tires
      Maximum mud performance Best for lifted ATVs Ideal for deep swamp riding Larger tires may require clutch upgrades, lift kits, or gear reductions depending on your ATV.
      Bias vs Radial Mud Tires
      Bias Ply Tires
      Stronger sidewalls Better puncture resistance Popular for aggressive mud riding Radial Tires
      Smoother ride quality Improved handling Better trail comfort Most serious mud riders prefer bias-ply tires because of their durability in harsh terrain.
      ATV Mud Tire Maintenance Tips
      Wash mud off after every ride Check tire pressure regularly Inspect sidewalls for damage Rotate tires periodically Avoid excessive pavement riding Lower tire pressure can improve mud traction, but beadlock wheels are recommended for very low PSI setups.
      Final Thoughts
      The best ATV tires for mud depend on your riding style and terrain conditions. Riders who split time between trails and mud often prefer versatile tires like the Maxxis Zilla, while hardcore mud riders typically choose aggressive options like the Outlaw 2 or Assassinator.
      Before upgrading to oversized mud tires, make sure your ATV can handle the added weight and drivetrain stress. Proper setup can dramatically improve your ATV’s performance in deep mud and swamp terrain.
      Visit QUADCRAZY ATV Forum for ATV tire reviews, mud riding discussions, builds, and technical advice from fellow riders.

      View full post
×
×
  • Create New...