Quantcast
Jump to content

Recommended Posts

Posted

hi iam new here but i have a 08 750 king quad and at idel it charges and when u rev it up it does but when u turn the head lights on it does not and the regulator gets hot. the battery is good and its a new regulator..some say stator but before i buy one for 200 dollars i would like to no if that is it or not and how do i test it .any help would be great thx dan.

  • 2 weeks later...
Posted

i ran the test on the stator and it check out good.i added a few grounds and it actually bump up my volts from 13.50 to 14.53.and when u turn the lights on it charges now. but after 15 to 20 mins. the regulator gets hot it quits charging and iam assuming thats what it is doing.and wont charge anymore.but if u shut off the fourwheeler and start it back up it will charge again until it gets hot.do u think its the regulator or not. i could use some help here. thx.

Posted

the regulators do get very hot during operation, very hot to the touch ... you could cook an egg on it, but not light a cigarette ... i would hate to see you spend money on something you might not need. do you have a buddy with the same bike you could swap the part out to check? i know electrical components are non returnable/refundable after the package is opened ...

Posted

im pretty sure it runs all the time, leveling out the current ...

it almost sounds like the stator is failing because thats what makes the power, but then you wouldnt have spark to keep it running ... im not sure what other modules are in between ... so maybe it is the regulator, does the current drop and/or spike with it running? i think it should be 14.5-14.7 ???

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By tds7
      The battery on my Big Bear drops completely down in the battery compartment nothing sticks up to grip too, plus there is only 1/8" clearance along the sides, no way to get a grip on it to pull up out of battery compartment. I thought about putting a piece nylon strap under the battery and leaving enough up each side to give me something to pull it up out ff the battery compartment or using a big zip tie around the battery.
      Any others have any ideas or have had this issue. 
       
    • By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
×
×
  • Create New...