Quantcast
Jump to content

Recommended Posts

Posted

For those of you that know a dirtbiker and never know what the heck he or she is saying here's a run down on some popular dirtbike words.

Brraaaapppp: The most commonly used word in the dirtbike world. Usually we do this when we're bored and just want to express ourselves.

Endo: Front of the bike diving down in a crash usually causing rider to go over the bars. Usually used in conjunction with "wad" or "ate crap."

Loop Out: Opposite of Endo. Front end goes high and rider jumps off back. Usually occures with entry level riders off jump. Most commonly followed by laughter.

Wad: To crash or screw something up in a big way. Usually used as a warning. Example "don't do that jump or you'll wad it up."

Arm Pump: Occurs when a rider is out of shape or uncomfortable on the bike and his forearms get all stiff and feel like they're going to blow up. Hard to explain unless you've experienced it.

Wiskey Throttle: Usually occurs shortly after arm pump when rider accidently grabs a handfull of throttle when he shouldn't have. Usually occurs in corners and is followed by an Endo.

Yard Sale: A hard crash resulting in the bike cartwheeling and leaving parts across the track. Usually occurs in the first turn or on straight aways.

Seat Bounce: The art of sitting off the face of a jump and using the suspension as a pogo stick to clear jumps right out of a corner. When entry level racers do this it is usually followed by an panic rev and an endo.

Panic Rev: Usually done while endoing off a jump. A rider gives the bike full throttle and hits the rev limiter in a pathetic effort to save their butt. It usually does nothing for the rider but fans are able to follow the sound and watch the crash unfold.

Rev Limiter: As far as the bike will go in the rpm's before it blows up. Fast riders bounce off the rev limiter all the time to keep rpms up while in the air. Most people just bounce the bike off the rev limiter (especially 4 strokes) because it sounds good.

Whip: Leaning off the side of the bike on a jump and laying the bike over in the air. Not to be confused with just sticking your butt off the side of the bike.

Swap: Occurs when back end kicks violently from left to right. Usually occurs in whoops sections or long rough straight aways.

Whoops: Section of track with large bumps the a rider has to skim over as fast as possible. Endos, panic revs, rev limiters, and swaps are usually found here.

Case: Coming up too short on a jump. Usually occurs with a panic rev.

Over Jump: To jump passed the landing of a jump and landing on the flat ground.

Triple: A jump that has a take off and two landings. You can double it and land on the first landing or jump the whole thing at once. Usually found on arenacross and supercross tracks.

Motocross: Outdoor races that usually have longer lap times and last longer.

Arenacross: Indoor racing that has very short lap times and is held in arena's and at fairs.

Supercross: Indoor racing that is held in football and baseball field size stadiums.

Cross Country: Outdoor races that are really long and last about 2 to 3 hours held out on peoples land that people have just made trails on and became race tracks.

So now when someone says "This guy was racing arenacross and seatbounced a triple but cased it and wadded it up" you'll know exactly what they're talking about. Brraaaappp!!

  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By DemonQuad666
      I'm sure this has been tossed around on here numerous times but with the unveiling of the new KTM fuel injected 2 stroke. Could this be the first step in a come back for my beloved double ding ding machines. Ok lets hear it. Why do you like one or the other??? Myself, I always felt it was the throttle control and Powerband response with the 2 strokes. I know this sounds weird but on a 4 stroke, no matter size or model. I always felt like i was along for the ride instead of in control. I've spent hours on my buds 400EX, even took a new 450r for a spin. before they discontinued them. Blasters, Banshees, and a number of 125's, 250's and even one late 80's Honda XR250R... Results all the same. For me its a comfort and control that im used to with the 2 strokes.... and i love the smell of bean oil... So lets hear it. Im sick of arguing with same two people at work on this issue.
    • By 4Trax
      Looking to do some work and upkeep service to my 2005 Honda 350 FE. Looking forward to the forum.
    • By ATVNetwork
      The AMA U.S. ATV Motocross Team of Bryce Ford, Joel Hetrick and Brandon Hoag dominated in the Czech Republic at the 2024 Federation Internationale de Motocyclisme (FIM) Quadcross of Nations. It marks the sixth time that the team has secured a global championship since 2017.View the full article
    • By CJRenaJohnson
      Has anyone been here? I have been there a few times this year and I love it! It is quite muddy in parts of it, but there is something for EVERYONE there! They just hosted the season opener for Championship Mud Racing there and it was awesome! Its one of my favorite privately owned parks in this whole region!
    • By autocustomizer76
      Hey all got a Kawasaki 300 that's seen better days I'm looking to get running.  But first, I'm working on a Honda 350 ES and mainly needing where are you all finding quality parts at good prices.  Atvs are really hot items around here right now and most of the folks wanting and needing them are not familiar with working on them.  I'm looking to find a good resource for information and if it works out well pass this group along to the folks I help to get them in the know how to get the most out of their machines.  Thanks in advance.
×
×
  • Create New...