Quantcast
Jump to content


Problems with my Kodiak

Muzzlegirl

By Muzzlegirl
in Yamaha ATV Forum

 Share

Recommended Posts

Muzzlegirl Newbie

Muzzlegirl

Posted
Posted (edited)

I have been starting my Kodiak all winter to make sure the battery was charging. I took it out on a ride last week 7 parked it. Went out today to go for a ride & when I tried to start it it made a buzzing noise when I pushed the starter button. It was in neutral & I put it in park & still no luck. I then put it back in neutral & it started. I turned it off & tried to start it again & it made the buzzing noise. It won't start now. The buzzing noise is coming from the left side off the atv on the back end. That is when I was sitting on it. Any help would be appreciated.

I have taken my seat off & believe my problem is the starter solenoid. It has a 30 amp fuse & a spare fuse with it. The fuses look good. I also checked the starter fuse & it seems to be good. Any help please. Would like to ride tomorrow. Thanks

Edited by Muzzlegirl
Link to comment
Share on other sites
  • 3 weeks later...
raykinney Newbie

raykinney

Posted
Posted
I have been starting my Kodiak all winter to make sure the battery was charging. I took it out on a ride last week 7 parked it. Went out today to go for a ride & when I tried to start it it made a buzzing noise when I pushed the starter button. It was in neutral & I put it in park & still no luck. I then put it back in neutral & it started. I turned it off & tried to start it again & it made the buzzing noise. It won't start now. The buzzing noise is coming from the left side off the atv on the back end. That is when I was sitting on it. Any help would be appreciated.

I have taken my seat off & believe my problem is the starter solenoid. It has a 30 amp fuse & a spare fuse with it. The fuses look good. I also checked the starter fuse & it seems to be good. Any help please. Would like to ride tomorrow. Thanks

I have the same issue.....have you found your problem??

Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Brantley11
      2000 Yamaha Grizzly 600 No start but with good spark
      By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
    • HoldenBoy
      Starter not staying engaged while cranking
      By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • Suzukiquad
      Favorite or go to Mod for all four wheelers
      By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
    • Drillbit
      1997 Yamaha Kodiak 400 fouling plugs
      By Drillbit
      Hey all,
      I need some input on a problem I'm having with my Kodiak 400 that keeps fouling plugs. First off, I've done a lot of work to this thing, most of it all in good fun. Brake work, cv joints, u joints, carb kit, checked valve lash, compression good, changed all fluids, etc... My problem is it keeps fouling plugs very quickly. I can put a new (manual recommended plug) in and it starts right up, runs great, idles great, picks up good. Doesn't stutter at all. I ride it for 1/2 a mile, it cuts off and won't start back up. I let it sit overnight thinking maybe it got to hot. Try to start it the next day, nothing. Put a new plug in, fires right up, runs great for another 1/2 mile or so, dead. The plugs come out and look carbon fouled with dry black soot on them. I don't know if this is a fuel/air mixture problem or a ignition problem. A couple of things that I noticed is I never need to pull the choke out to start it. Also, when it starts it automatically idles high like an automatic choke would do, then it comes back down to a good idle. Also I noticed that the air/fuel mixture needle valve screw does nothing when I adjust it in or out. I can screw it all the way closed and the motor still runs and idles good. Any advice would be greatly appreciated. I'm almost leaning to a ignition breaking down the plugs??
      Thanks! 
    • DarkRider
      Have you ever purchased a quad from an impound auction?
      By DarkRider
      This is something I'm extremely curious about. Has anyone ever attempted to buy a quad (or any other vehicle) from an impound lot? I've always wondered if this could be a bargain, or a waste of time. Google searches do turn up some helpful results. Looks like the state of NJ holds auctions online which I'd be a bit hesitant about.
       
      My online searches haven't really turned up any results of anyone buying an ATV this way. I'd be really curious if anyone tried this, or knows someone who has. I've actually found a couple pages with online auctions for my state, but none had ATVs.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...