Quantcast
Jump to content

Recommended Posts

Posted

So i cleaned the carb after the throttle getting stuck out and having to kill the fourwheeler. I cleaned the carb and reinstalled it. So they i did get it to start up but the idle was freakin high so i killed it and it started three more times. Then a few days later i pulled it out and was gonna tune it. I got it to start a few times but then i noticed i was adjusting the mix not the idle(i figured that out when it back fired and the idle didnt change...). So i went to fire it back up aannddd dead as a dog. So today-which is a little colder-i went to start it. I pulled the chock out and now it clanks? It almost sound like if the piston is slapping into the head? I dont know but it definitely sounds like to pieces of metal hitting. I dont think it has ever done this before. I am positive the mix is correct. What could be wrong. Thanks

Posted
it runs and clanks or clanks when starting it?

Well it isnt starting now. It cranks but doesnt start. So it it clanking on the crank. It hasnt ever done that been

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...