Quantcast
Jump to content

Recommended Posts

Posted

My normally problematic to start 05 500 4x4 (carb/fuel issues) has been fine the last couple months after tearing down carb and cleaning again etc.. It has turned very cold, I have been running it every 5-7 days and it has been starting. Need it BADLY BADLY right now, snow storm is almost here, and now no start. It is much colder than usual. Can someone tell me how I might try to start it?? I did not try starter fluid, I don't know where to spray it?? Air intake?? But not sure where that's at? Sad I know, I don't maintain it myself. If someone can help me I would appreciate it. Thanks.

  • 2 weeks later...
Posted
My normally problematic to start 05 500 4x4 (carb/fuel issues) has been fine the last couple months after tearing down carb and cleaning again etc.. It has turned very cold, I have been running it every 5-7 days and it has been starting. Need it BADLY BADLY right now, snow storm is almost here, and now no start. It is much colder than usual. Can someone tell me how I might try to start it?? I did not try starter fluid, I don't know where to spray it?? Air intake?? But not sure where that's at? Sad I know, I don't maintain it myself. If someone can help me I would appreciate it. Thanks.

Just saw your post. I also have a 2005 500 auto. 99.9% of the time it starts immediately.

But, there are a few things that will cause it to not start at all.

3 things...Make sure you have fuel, spark, and air.

Air seems to be the most common problem when it will not start at all for me.

There is an air line from the fuel pump to the carb. If this is broken, it will not start.

There is another breather air line from the carb that has to be at least 12" to 16" long and not broken. (it just hangs there) If this is broken or too long, it will not start. Sometimes little mud wasps pack it full, and it will not start.

I speak from experience!

I'd be interested to know if you found out the cause (by this time you must have solved the problem).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...