Quantcast
Jump to content

2005 ltz 400

Cford

By Cford
in General ATV Discussion

 Share

Recommended Posts

Cford Rookie

Cford

Posted
Posted

My 2005 ltz 400 motor breaks up the faster I go. (3rd, 4th, and 5th gears). I've only changed the plug. What next. At first it was acting like it was locked up, but I finally broke it free, so it's not seized up. But there's a funny sound coming from it and it doesn't turn over as easy. Any ideas as to what might b wrong?

  • 4 weeks later...
ipaman Newbie

ipaman

Posted
Posted

Clean filter? After that I would remove the crab and clean it and all the jets out. If that doesn't fix it you might have to change some of your jetting.

Jw7054 Enthusiast

Jw7054

Posted
Posted

Before anything a carb cleaning isnt a bad idea. Get down and deep in all the jets. Completely take every thing out and spray it off. Then see what happens from there. If you dont know about carbs just search how to clean your bikes carb on youtube

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • AnthonyT
      First time ATV buyer
      By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • Frank Angerano
      My first trailer project.
      By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • JustCrazyNoQuadNeeded
      Bear Tracker YFM250X Gears Slipping No Reverse
      By JustCrazyNoQuadNeeded
      'Gidday.  An issue I can't find discussed already - my Bear Tracker selects into 1st gear fine. Selects other forward gears fine too but all above 1st gear are slipping. Can select reverse but nothing engages/happens.
      Any ideas what I might be dealing with?
      Cheers,  Jim.
       
    • maikytech
      Need help with my 2007 polaris twin motor
      By maikytech
      Has 60 psi and motor recent flooded...what the true compretion
    • p5200
      2005 500 Scrambler acting up above idle speed need help
      By p5200
      I added more fresh gas it sat one day now, it's acting up again. Before cleaning out carburetor it wouldn't idle good and had gas leaks from carburetor. Now it idles pretty good but, if I increase throttle speed at a certain amount it starts missing bad. I'm going to try and post a short video. Just about ready to give up on this thing.😒  you can see reflection perking in video.

      20240217_114429.mp4

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...