Jw7054

A good rule of thumbs is to never leave a wire bare a specially in water. A new starter is normally pretty price for a little motor. Normally a rebuild is way cheaper if you can find one. And the grinding probally means you need new brushes.

U might need to rebuild ur starter motor. They go out because the brushes where. You should be able to find a rebuild kit. If you take the starter out and look into the motor can there should be two gray pieces of metal. Those ride on the motor shaft. They will be held to the shaft with a spring or some kind of spring steel. If those are gone you need to rebuild it.

I was putting in a new oil filter and i was putting the 3 nuts back on that hold the door thing for the filter one got tight but something stripper. Whether is was the bolt thing or the nut i dont know. Does any one know how to tell if it is the nut or the bolt because i filled it with oil and then checked them to make sure they were tight and it just was pretty free. It only leaks slowly right now. I dont want to take the nut off not and not be able to get it back on with a full oil tank. If there are any easy ways to tell please do tell me how Where does this screw go again?