Quantcast
Jump to content

jen

Premium Members
  • Posts

    1,033
  • Joined

  • Last visited

  • Days Won

    126

Everything posted by jen

  1. Seriously, i hoe you recover. i cannot imagine the pain. Good info however..... Probably a lot of people learned a lot from Jeffs problem as it unraveled during this Post. I know I did.
  2. Whew!!! heavy info
  3. Do you know where Jeff can get a kit for that?
  4. Hmmm...Permanent magnet wenches ..winches...appear to be the 'Go to'. Grandpa had a Series wound winch on his jeep snow plow. He was afraid of permanent magnets over heating with repetitive use. However, Series wound are more expensive. and heavier draw more curren My biggest concern is the CONTROL burning up on any winch.. I have one now that i have to use jumper cables to operate. But whatever i buy next will have a good control. I'll pay extra to get the best .
  5. Hey! and welcome

  6. Good morning Wenatchee, WA....Apple capital of the World! Hot in summer and a lot of snow in winter. Beautiful area.
  7. i like the Kel-tec 22mag PmR 30.... Its on my wish list...The poor man's (woman's) 5.7. But also the Factory id about 40 miles from my apartment. It easy to get service.
  8. What do you have?? I have a few military rifles..LOve them and one Takerev 25 mm Russian.
  9. Oh OK Did not know that was what they were called.. Like vacume advance on Distributors. Duh... I feel stupid..
  10. Hope MECH is better....Back pain OMG... THey say it's worse than childbirth. I wouldn't know about either. Of course the model ES Jeff has is the air cooled four stroke w OHV. I am sure jeff doe not want to pull the motor (Jug) apart. So a video is great idea.
  11. That was interesting about pressurized crank case. HMMM
  12. BTW...for tender sufaces that you don't want marred i have soft nylon motorcycle tie downs. They are rated in Lbs ,600 lbs i think, and have a sewn loop so it can quickly be looped around something and be secure. the p-other end has just a straight loop. Herewith is a picture of a 12 inch strap.
  13. Here is my homemade wheel Bonnets. A friend gave me a bunch of old snow chain cross chains. 3/16 in steel cable for side straps. I crimped on 1/2 CU tubing to keep chains from sliding along steel cable. working on best tightening system now. The tire shown is a 15 inch on my sand rail. Should easily fit my SXS tires also.
  14. BTW Gwbarm will know if I am correct about the oil seal o ring inspection.. AND if you cycled the motor with the spark plug out did it blow oil??Just wondering for my own information.
  15. Happy Birthday The Great Big Beautiful USA!
  16. Great Job Jeff sticking with your problem...I wonder if you can just pull the Jug (Guys like to call the cylinders Jugs. LOL.) .pull the Jug off just enough to inspect the oil ring...it's the bottom ring on the piston. Remember if you pull piston out you will need a "ring compressor " tool to put rings and piston back in.😘
  17. release pressure after each test? when cranking without plug does any oil blow out? or pieces of carbon?
  18. YEs that is high from what I read. 70+ is in range from what i saw on Honda forums. cranking motor without spark plug does it blow out oil. Maybe there was oil in cyclindre. Rechec k. Release tge presssure between each check
  19. The gauges lock at the highest pressure. That is why it is not going down.
  20. Hey ,,...Let us know how it is going. The compression check will tell a lot. Remember what Gwbarm said to check compression then add oil and recheck compression. Good Luck keep in touch.
  21. BTW there are a lot of Pythons down there...so Goooood mornnnning Aligato /Python Alcatraz!!!
  22. Auto zone and other auto parts stores may have free ones to use.
  23. Is there oil on the spark plug when yo shut down and remove plug? What mixture of fuel are you using? Does it have normal power and acceleration?
×
×
  • Create New...