Quantcast
Jump to content

Recommended Posts

Posted

 

Hi all. I just replaced the battery and the regulator in my 1995 suzuki king quad 300. It fired right up with the new battery in. Switched it off to go get my helmet and when i came back out i hit the start button and every light shut off and stayed off. Flipping all switches did nothing and no electric start. I checked the battery and it is reading proper voltage and neither fuses are blown. I pulled it with the pull start and it ran perfect all day long just no lights or electric start. I have done a start in gear mod so i am guessing that is why it started with the pull start. Every so often the neutral light will come back on but when I switch the kill switch to the run position it turns back off and wont come back on. I am not sure what to look for at this point so any help is greatly appreciated. I included a wiring diagram too just incase it helps. c1cdb7ea0208d44d7ce0bb66a7f8faaf.gif

 

 

Sent from my iPhone using Tapatalk

 

Posted

Ok so after some more looking around i found that the smaller wire coming from the battery positive was corroded and broken. Crimped new male connector on and everything works as it should.


Sent from my iPhone using Tapatalk

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
×
×
  • Create New...