Quantcast
Jump to content

Recommended Posts

Posted

have the quad running took on a test ride runs good but bogs down at about half trottle. clean carb best i could. what would be causing this. i beleave the ing timing is control by cdi. please help

Posted

Bogging  under part  throttle  is almost always  due to  fuel  starvation. Clean the  carb again..  Look for tiny  jets plugged..  Some orifices  are  easy  to  miss.  Use  "canned  air"  to  blow  our passages  if you don't  have  a source of compressed  air..  Welders  tip  cleaner sets have  wires that  fit  nearly  every jet  and orifice.

  • Like 1
  • Thanks 1
  • 2 weeks later...
Posted

Just  use  screw  drivers   that  are  a proper  fit for  the  slots. When  you   screw  in the  jets they  only  need to  be  seated  snugly. . Do  not  over  tighten them.  Turn  down  until they  seat  and that's it.

  • Like 1
  • Thanks 1
  • Ajmboy changed the title to suzuki lt230e bogs down
  • 3 weeks later...
Posted

rebuilt carb running good able to give it full throttle. but i have other question how to us the chock i'm trouble with cold start.  i had motorcycles with a van chock that close off air flow.  

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By DexKing
      Good day everyone!
      I am pretty new to ATV/UTV/Small engine repairs and would like input on your absolute must-have specialty tools for maintenance and repairs. Aside from the obvious wrenches and sockets, what are some more specialty type tools you use for troubleshooting? I don't plan to open a repair shop or anything, I just do this as a hobby. Looking forward to your responses!
    • By Eisenmatt17803
      Good Morning!
      Has anyone had a problem with the small aluminum 90 degree elbow popping out of the valve cover and blowing oil all over the place? It looks like it is simply pressed in and will most certainly repeat the offense. Any experience you all can share with this issue?
      Thanks in advance.
    • By quadcrazy
      What is your take on ATV Insurance? Do you have ATV Insurance? If so, through which company and why?
      We'd like to hear our member's opinions on ATV Insurance. Please vote on the poll.
    • By tflack500tbx
      Background,
      This winter (Dec.) I was plowing and everything just died, just quit.  No lights, no pull start, No nothing.  I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this.  So I changed it again, thinking this was the same problem.  Tried to start it and a small pin hole in the CDI appeared with electrical smoke.  
      Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues).  I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.  
      Went to start it and the solenoid rapidly clicked.  All the dash lights on, headlights work.  Pull stared it and it fired right up no issues.  Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery.  Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good.  Pushed the starter button and it fired right up ran great.  Turned it off to test it again, Turned the key and nothing.  No dash lights nothing.  Took the jump box off and pulled started it.  Started it right up.  Re-hooked the jump box, still nothing.
      Any Ideas? 
×
×
  • Create New...