Quantcast
Jump to content

Recommended Posts

Posted

I have an 08 250 that will not spark with the electric start. Starts great with the pull cord. I've replaced the stator, checked and cleaned all the electrical connections. Even with the booster on it won't spark while the button is pushed. Any ideas?

  • Ajmboy changed the title to 2008 Arctic Cat 250 no start with electric start
Posted

That's interesting, so pressing the electric start cranks the starter but the motor just never turns over? Spark is cut off when using the electric start? 

* Added full year and manufacturer to topic title.

Posted

No the motor turns over normally with the button pressed, just theres no spark.(spark plug out watching). Sometimes it will give a spark as you release the button, but not always. Pull over with the rope and it sparks like crazy.


Sent from my SM-G950W using Tapatalk

Posted

Got at the atv again, cleaned all the connections, jumped the starter with another battery and still no spark. Found out it seems to be more the speed the engine cranks that causes the no spark. If I pull the rope slowly there is no spark either.


Sent from my SM-G950W using Tapatalk

  • 5 months later...
  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...