Quantcast
Jump to content

Recommended Posts

Posted

Hi Guys....brand new to this forum and Kodiak.
I have a 2008 Kodiak 450 4x4. I bought it used. It has 200 miles and 100 hours.

I tried to hook up a 15 gal. broadcast sprayer w/ a pump to the atv. It has two leads that I typically hook to the battery of my other atv and I've never had any issues in the past.

this was the first time I ever hooked this pump sprayer to this atv.

The atv started right up and I brought it from 1 barn to the other to hook up the sprayer. I shut it down and hooked up the two leads from the pump to the battery terminals via alligator clips. the atv was off at this time.

when I hooked up the leads, I heard a slight crackle/pop when I hooked up the battery terminal leads and there was a slight electrical smell. i thought it was just the crackle you get when getting a good connection to the terminals. i tested the pump, it worked and proceeded to start the atv.

No luck. All digital display items work and the atv will turn over, but it will not start. it sounds like there's no fire to it. it turns over strong. 
I checked the choke and the auto kill switch thinking it got bumped.
I also checked the few fuses in the same compartment as the battery. all visually looked good.

is there another fuse I'm missing?
Anything else I should check?
My next step is to pull the plug, ground it and see if I got spark.....but I find it odd that not 5 minutes before it fired up just fine and it drove down from the other barn...and now it wont start after hooking up the sprayer.

ANY thoughts or input is much much appreciated!

Thanks!
JR

Posted

You say

"when I hooked up the leads, I heard a slight crackle/pop when I hooked up the battery terminal leads and there was a slight electrical smell. i thought it was just the crackle you get when getting a good connection to the terminals. i tested the pump, it worked and proceeded to start the atv. "

Just guessing was the pump turned on when you connected it? If turned off there should not have been and issue - something close get shorted?

Suggest you download the Shop Manual and check out the wiring diagram

 

  • Like 1
Posted

First thought is that you had the terminals reversed and the second thought is the motor is seized on the pump sprayer. I used to have a 450 kodiak and loved it!

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Admin
      View File 2021-2026 Polaris Sportsman 450 / 570 1-Up service manual
      Download the 2021-2026 Polaris Sportsman 450 / 570 1-Up service manual PDF for complete factory repair, maintenance, troubleshooting, and diagnostic procedures. This comprehensive Polaris Sportsman repair manual covers all major systems including engine service, EFI fuel injection, clutch and transmission repair, AWD drivetrain systems, suspension, steering, brakes, electrical troubleshooting, wiring diagrams, torque specifications, and factory maintenance schedules.
      Designed for ATV owners, mechanics, hunters, trail riders, farmers, and DIY enthusiasts, this factory-style service manual provides detailed step-by-step instructions and diagrams for maintaining, troubleshooting, repairing, and rebuilding the Polaris Sportsman 450 H.O. and Sportsman 570 1-Up utility ATV models.
      Topics covered include:
      Polaris Sportsman 450 engine repair
      Polaris Sportsman 570 service procedures
      EFI fuel injection diagnostics
      Clutch and transmission troubleshooting
      AWD and differential repair
      Suspension and steering maintenance
      Brake system service
      Electrical troubleshooting and wiring diagrams
      Oil change procedures and maintenance intervals
      Torque specs and factory service data
      Polaris ATV diagnostic procedures
      Popular related searches:
      2021 Polaris Sportsman 570 service manual PDF
      Polaris Sportsman 450 repair manual
      Sportsman 570 wiring diagram
      Polaris Sportsman torque specs
      Sportsman 450 maintenance schedule
      Polaris Sportsman troubleshooting guide
      Polaris ATV factory service manual PDF
      This Polaris factory repair manual is ideal for riders looking to maintain, troubleshoot, repair, or upgrade their Sportsman 450 or Sportsman 570 1-Up for trail riding, hunting, farming, utility work, and off-road adventures.
      Submitter Admin Submitted 05/28/2026 Category Polaris ATV  
    • By Admin
      View File 2021-2025 Polaris Sportsman 450/570 1-Up service manual
      2021-2025 Polaris Sportsman 450/570 1-Up service manual
      Publication Printed August 2024 (PN 9941980 R01)
      Submitter Admin Submitted 05/17/2026 Category Polaris ATV  
    • By colin james
      View File 2017-2019 sportsman 450/570 with eps factory service manual
      This  is the factory service manual for the 2017-2019 factory service manual for the sportsman 450/570 with electronic power steering 
       
      Submitter colin james Submitted 09/06/2018 Category Polaris ATV  
    • By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
×
×
  • Create New...