Quantcast
Jump to content


new member - help Identifying Yamaha ATV


dtoots1

Recommended Posts

just bought a used yamaha is marked as  moto 4 350...vin numbers shows is a 2006 , but nothing showing as  to model..is 2 wheel drive 5 speed w/ hlr on engine..what is the thing supposed to be so i can get a manual??? nothing shows big bear or other such info..did manage to get er running....needed a boost on the battery and cleaned up a LOT...actually got 2 atvs, the other one marked the same but is a bit different.2whl ec w/ hlr on front plastic..wheels etc, engine appears different and cannot find a vin number on the left frame whatsoever!! nor on the right side or front or back..and is no damage areas

Link to comment
Share on other sites

  • Ajmboy changed the title to new member - help Identifying Yamaha ATV

Welcome to QUADCRAZY! We get a few of these types of topics so if you can post some pictures in this topic of your Yamaha ATV, maybe you can get some help identifying it. I also moved your topic to the Yamaha forum and added to your topic title that you need help identifying your ATV 😁

Link to comment
Share on other sites

the working bike vin number is  jy459v0056c041692...10th digit is number 6 decoder says that is 2006///????   nothing showing that moto 4 was made after "97???    pics are one i cannot find vin number...tried sanding area carefully but don't want to get aggressive and still cannot see numbers...does feel to be a bit flat in that area and thought seen something there.

Link to comment
Share on other sites

  • 2 weeks later...

okay, have more info on the first bike with shifter on the motor...that actually is a 1986 moto 4 yfm225 s...that would make what i thought was a 6 a G..then i assume the shifter in the plastic is a later model..part of that vin appears worn off from foot traffic..so for a 32 year old bike she sure runs nice!!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
×
×
  • Create New...