Quantcast
Jump to content

Recommended Posts

  • 2 weeks later...
Posted

yes as far as I can tell it is. still trying to find something but I can put fuek in intake and will fire up, tested fuel pump it will run. at same time I tried it my display for dash quit also. it lights up yellow but nothing else

 

Posted

yes I unplugged fuel pump ran power directly to pump and it turned on. still testing things and found a relay call ignition/starter relay. It doesn't seem to have any 12 volt power to any of the wires for it

Posted

Have you checked all the fuses? 

You will probably have to get out the wiring schematic and start tracing the power and see what is causing the problem. One of my customers had the same machine and the voltage regulator / rectifier was bad and cooked the battery it was doing similar issues. 

Posted

Haha that is funny you posted this. I was just out going through wiring and came to regulator/rectifier plug. It was melted on 2of the 3 wires. I was just about to ask if this may cause dash not to display and fuel pump to not run.

  • Like 1
  • Ajmboy changed the title to 2004 Suzuki King Quad 700 Fuel Pump Does Not Turn On
Posted

Just saw this topic, I used to have a 2004 KIng Quad. Was going to say that you definitely have an electrical issue if you can bypass and get the fuel pump to work. These quads have more electrical with the fuel injection and all than older quads. Fix those melted wires and try to find out what may have caused it. You may need to replace the regulator/rectifier.

* Topic title adjusted to include ATV issue

Posted

hey @AjmboyI seen a post where you were wondering on recalls for 2005 king quads. mine is an 05 made mistake in my post said 04. Did you find out on recalls. Btw I am going to clean up wires and trace them see if there is a bad spot. Thanks for input

 

  • Admin changed the title to 2005 Suzuki King Quad 700 Fuel Pump Does Not Turn On
Posted
1 hour ago, Cory Macleod said:

hey @AjmboyI seen a post where you were wondering on recalls for 2005 king quads. mine is an 05 made mistake in my post said 04. Did you find out on recalls. Btw I am going to clean up wires and trace them see if there is a bad spot. Thanks for input

 

I don't remember but saw something somewhere and would search online and on a quick google search I found https://www.cpsc.gov/Recalls/2005/cpsc-american-suzuki-motor-corp-announce-recall-of-2005-king-quad-all-terrain-vehicles

I changed your topic title to include the correct 2005 year 😉

EDIT, here is @Ajmboy's topic

 

 

Posted

Boy that's an old topic...lol. I don't recall (no pun intended) the recalls on the king quad I had back in the day except for the ecu which I never had done and ended up selling it anyway.

Posted
On 10/2/2018 at 7:12 PM, Cory Macleod said:

Hey guys thanks for all the help. A pile of evenings later and it up and running. Was a tiny wire broke off at a junction

Glad you fixed it and thanks for letting us know!

  • 2 weeks later...
Posted
On ‎10‎/‎2‎/‎2018 at 7:12 PM, Cory Macleod said:

Hey guys thanks for all the help. A pile of evenings later and it up and running. Was a tiny wire broke off at a junction

Hey man im having the exact same issue on the same quad! Can you tell me about where the tiny wire was located? (im not much of a mechanic so laymens terms please!)

Posted

I can later today. I know it was red wires with green tracer. It was located on the pull cord side behind side cover in the mass of wires that are taped together. I believe one went to fuel pump one to the dash or up front forsure. One to cpu and forget where other went. Maybe to fuses. Hope this helps and if you can’t find them let me know and I can send some pics to you when I get near machine later today

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
×
×
  • Create New...