Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Hi all, I was gifted this Bayou but she's been sitting quite some time. It won't crank using the factory start button but when I jumper the starter solenoid it cranks but there is no spark. The key has power coming in on the white wire and when turned on supplies power to the brown wire coming out.
I guess I should start with testing the pickup? I heard I may be able to jumper the wires coming from the pickup with an LED bulb and it will flash? I noticed in the manual that it should have around 110 ohms resistance so I'll check that as well. One thing I noticed was that the starter circuit relay has power on one of the black wires with the key on- this doesn't seem normal as I'm assuming the black wires are grounds? I think one of them comes from the start switch, travels through the starter circuit relay and then grounds the starter relay?
Mine is a 1991 so it has the 7 wire CDI (ignitor) and a 2 yellow wire alternator ( as opposed to the later 3 wire type ) with another 2 wires for the source coils (black & red wires ). The pickup wires are blue and black I do believe. Any help appreciated and yes I will test the pickup ASAP.
I'm trying to understand how the system works and I don't understand what the yellow / red wire from the kill switch does- I assume it gets grounded when the kill switch is "on" and therefore grounds the CDI so it can't activate the ignition coil? I noticed in the diagram that that yellow / red wire looks like it may be grounded by the ignition key switch when in the "off" position?
I also don't have 12v power at any of the wires going into the CDI- doesn't the CDI need to be powered? I also read on this forum that someone used a GM HEI module in place of the factory CDI just to test it for spark- does anyone have any info on that?
I hope I'm not missing something simple!
Here is a link to the diagram for my bike (which was posted by another user): https://www.quadcrazy.com/atvforum/topic/13742-1988-bayou-220-lost-spark/?tab=comments#comment-101193
Any help appreciated!
First of all sorry I have been MIA here for a while, been busy with school and work. I'll try and reply on some other threads asap, but posting this one because I just picked up a 2017 sportsman 570 before the new year and popped a boot on it going through a mud hole. The former owner had aftermarket axles on it to accommodate the 4in lift and idk what brand they are but they're skinny as heck and idk what boot to buy to rebuild with? It's the rear right lower boot (under the brake calp.). I'll post some pics when I can and sorry again I've missed yall on the forum!
Does anyone make aftermarket engine parts for the Suzuki Quadsport LT-Z50?
Pistons, Valves, etc...?
I have found rings and complete gasket sets.... I need an oversize piston kit and valves..
One company is selling a piston, but upon further inspection it is an LT50 piston that they are saying is for the 2006 Suzuki Quadsport LT-Z50. Yet the LT50 Piston is not interchangeable with the LT-Z50 according to the pistons listed by Suzuki.
Any help would be appreciated
I am working on a friends 2006 Suzuki LT-Z50 that they purchased not running. I took apart the carb to rebuild it and someone had already been in there... They really destroyed the Air/Fuel Mixture opening in the body of the carb.. It is in no way repairable.
I have not been able to find an aftermarket carb to fit this model.
Does anyone know if an aftermarket carb is available?
Thanks for any help.
Recently Browsing 0 members
No registered users viewing this page.