Quantcast
Jump to content

Recommended Posts

Guest mudmonkey
Posted

hay guys i have yamaha rhino 07 660 with a upgrated cdi box, clutch kit, carb kit. my question is what's next, trying to get more tire spin

Guest mudmonkey
Posted

now that;s not funny your just jelous ha ha ha

Posted
hay guys i have yamaha rhino 07 660 with a upgrated cdi box, clutch kit, carb kit. my question is what's next, trying to get more tire spin

If you want to get some spin....get some N.O.S.

Yamaha-Rhino-Side-X-Side-UTV-Performance-Edelbrock%20Nitrous%20Systems.jpg

Performer Wet Nitrous System for Yamaha Rhino 660

System Includes:

5-lb. capacity bottle (shipped empty)

Performer nitrous and fuel solenoid

Electrical fuel pump to support extra flow

E1 series nitrous direct port nozzle

Stainless steel braided hose

Nitrous and fuel filters

Stainless steel jets for longevity and tighter tolerances

System and jetting for gains of 10, 15 and 20 horsepower

Aircraft quality fittings

Owner’s manual and all necessary hardware for a complete installation

Edelbrock Rhino 660 Nitrous Kit

Guest mudmonkey
Posted

i have a aftermaret pipe on it my top speed was about 50 but after i put in the clutch kit it's now about 37 with 28 inch swamper tires, i gained more low end power but when i hit a steep hill it slows down to a crawl, but keeps climing i have to hit the hill with a lot of speed to keep the momentom to reach the top

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By flyinbrian365
      View File 2023 Yamaha RMAX4 Wolverine 1000 service manual
      Factory service manual
      2023 Yamaha RMAX4 Wolverine service manual
      Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV  
    • By flyinbrian365
      View File 2021-22 Yamaha RMAX4 1000 Wolverine service manual
      Factory service manual
      2021-22 Yamaha RMAX4 1000 Wolverine service manual
      Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV  
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...