Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Ponetay

Trying to set the valves on a 2015 Polaris 110 outlaw

Recommended Posts

I’m am trying to figure out how to set this to tdc so I can set the valves. Anyone know the procedure?

Share this post


Link to post
Share on other sites


 Can't find manual for a 2015 outlaw 110 only the 50.  Are you sure on the year?. Let me know and I will get the procedure for you

Share this post


Link to post
Share on other sites

@colin james see if this helps you out it’s from the same model as yours not the same year but the cc matched and model and it’s only a year apart form your bike.   Should be the same.   

1489F3CB-6AFD-44C2-A8A0-6E8867D8CED4.thumb.jpeg.d9041144dd237bc799098620b307d3ce.jpeg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By 06kfx440
      I took my kfx out and it didn't sound right. Besides bouncing off the rev limiter, does it sound right to you?
       

       
      Sent from my SM-N920V using Tapatalk
       
       
    • By Matthew Richards
      i just ordered a new head for my 2002 yamaha yfm350x warrior, does anyone know if the valves are set to the correct clearance right out of the box or do they need set?
    • By canadiantimberwolf
      got it fix but is it a common problem on old yammies?
    • By panthers06232
      the mojave is a 1999 it will start up if you kick it forever backfires and then dies after the motor warms up it has gas running back into the air filter i cleaned the carb do i need to just rebuild it or does it sound more like it needs a valve adjustment if so does anybody have step by step instructions on how to adjust them
    • By wheelewilly
      My 2003 400ex has been smoking forever so I broke down and bought a new wiesco 416 piston and stage 2 hot cam,but when I tore it down the bottom of the head where the valves are was covered with black really hard carbon and I mean a lot also my spark plug was one big ball of the same stuff my head pipe looks the same inside is it valve seals or just bad rings Im going to replace the valves any way with the rebuild but I m just wondering if it could be anything else?
  • Similar Tagged Content

    • By Austin Rowedder
      Hi I have a 2007 Polaris outlaw 525 irs and am trying to replace the needle bearings in the rear a arms. I was wondering how you go about getting the rubber seal and bearing out!?
    • By stinky
      I have an Outlaw 110 that will struggle to turn the engine over. Jump starting doesn't help other than the battery will drain LONG before the bike eventually starts, so is required. If you keep messing with it long enough it will eventually magically begin to crank fine and sometimes finally start. Once we finally get the bike to start and warm it up thoroughly, it will turn over and start just fine the rest of the day like nothing ever happened... next day it won't turn over again.  Internet research has found lots of people saying they replaced starters, starter clutch, wiring, etc. but with only about 50/50 success rate for their particular problems... and I never found anybody describing a problem like mine, so I'm looking for advice/experience. Would rather not just start blindly throwing parts at it. Does anybody have any thoughts/ideas?
    • By Dravkracing
      Is there anything I can do to make this little quad go faster? Thank you 
    • By Xyla Cat
      View File 2006 - 2007 Polaris Outlaw 500 Service Manual
      2006 - 2007 Polaris Outlaw 500 Service Manual.pdf
      Submitter Xyla Cat Submitted 08/25/2018 Category Polaris ATV  
    • By Xyla Cat
      2006 - 2007 Polaris Outlaw 500 Service Manual.pdf
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...