Quantcast
Jump to content


1988 Bayou 220 2x4 need help to remove generator/ starter 1 way clutch cover

Monika Novakov

By Monika Novakov
in Kawasaki ATV Forum

 Share

Recommended Posts

Frank Angerano Grand Master

Frank Angerano

Posted
Posted

Welcome to Quadcrazy @Monika Novakov I’m not sure what you mean by the generator/starter ? Do you mean the left side engine cover?  The starter should be removable with a little bit of wiggling without taking that cover off. You can remove the left side engine cover to see what’s going on with the bendix/one way clutch depending on the year/model and see how it’s all operating and if anything is wrong.  If the cover is sticking maybe a little tap with a rubber mallet will help.  

Here’s a YouTube video of a 250. Should be pretty much the same. 

 

  • Like 2
Link to comment
Share on other sites
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Flash_fella
      Loss of spark in my 1988 lt300e quadrunner
      By Flash_fella
      I had a sudden loss of spark in my 1988 Suzuki LT300E quadrunner and we tried a new plug but still no spark. Then we checked the boot and there was no issues with it. I then took off the coil as I was going to get a resistance reading with a multimeter however I cannot find anywhere what the readings should be. The coil is a Mitsubishi F6T 411. Any help would be appreciated. 
    • Werewolf
      2010 Polaris 500 HO oil getting in the air box
      By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • JohnnyB
      1988 LT80 Crankcase Full of Oil
      By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • Mhatayas
      Oil leak 1985 suzuki 250
      By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • bob2007
      1992 kawasaki bayou 300 KLF300-B5 repairs
      By bob2007
      Hy there great to be able to communicate with people having knowledge I have a continuous problem with a leaking carburetor and I just saw a small rubber hose detached from the bottom of the carburetor and i cannot find were it should be attached and how the two side should be affixed to the carburetor any suggestions as i cannot find a description plan on it thank you Bob

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...