-
Similar Forum Topics
-
By AKMichael
Hello All,
I have a 1999 Yamaha Big Bear 350 4x4 trying to get fixed up so my grandson can go out in the woods with me.
We have owned it over 10 years. It got harder to start, until it finally would not. Replaced the carb. Right afterwards, it started and ran nicely, but after turning it off, would not restart. Tonight I used starting fluid and ran, then died. Adjusted the idle up a little, used more starting fluid and ran great. It idled about 15 minutes. Turned it off, and restarted. Ran it around the yard about 5 minutes. Turned it off, and would not restart.
Any ideas or suggestions would be greatly appreciated!
Thank you.
-
By briantutt
I found a 1984 ATC 200S. I have been bringing this back to life and now it runs great! Crazy thing I cannot get used to is I had a 1986 that shifted 1 thru 5 all up. This one is all DOWN!
Currently rebuilding shocks right now.
-
By Seabench
I have a Polaris Xplorer 250 4x4. It's a great quad, ran without issue until I noticed the fuel valve was slowly dripping gas. Ordered a new one, easy enough to replace, but now it won't start! I put the old one back on to see if it was an issue with the new petcock, and it still wouldn't start (it was running fine 15 minutes earlier). Engine just cranks and cranks. Any insight would be helpful.
-
By Steve Howard
Ran find shut down the quad next day would start and idle when you try to accelerate it would start popping through the carb got a rebuild kit soaked it in chem clean after break down for 12 hours on slow vibrate reassembled and adjusted per manual still the same thing any help would be really appreciated thanks and happy ridding

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.