Quantcast
Jump to content


1999 polaris 500 magnum


Recommended Posts

hi guys I'm back again lol. Last year I bought a polaris 500 magnum had some issues we banged our heads together and Finally fixed the problem well im back. So it ran fine for a long while then just lost spark. So bought the same exact stator and pickup coil I bought b4 boom fired right up now the kicker runs for 7 sec then dies ok so hear we go with what I've tried

Gap in throttle good unplug black wire did it no go

Reflowted bowl just incase fuel stopped not and didn't fill up not it 

Bought a new fuel pump stator pick up coil twice now 

Bought cdi box nothing 

But if you hold it half throttle when you start it runs for ever

So new spark plug new wire

Coil nothing ill take any ideas besides fuel even mention it 

Link to comment
Share on other sites

Willing to bet the parts that you replaced were done so with chinese junk from ebay or amazon, correct?  Put the OEM parts back on.

next step, check the timing.  sounds a lot like timing is retarded a couple teeth.  I'd check timing and the timing chain lash because they only jump time when the chain is stretched.

I didn't mention the most obvious and most likely issue of fuel because I'm pretty sure you said not to mention it.

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
×
×
  • Create New...