Quantcast
Jump to content

Recommended Posts

Posted

@Ajmboy You're right, RK sells the Hisun.  Tractor Supply sells BIg Horn which at one point was made by Bennche, don't know who makes them now.  When Bennche made them, they were consistently a 2/5 rating, complete crap.  Hisun seems to be rated a little better, but still has to be considered as a lower to mid grade UTV.  Maybe if you consider price first, they don't do too bad like most Chinese machines.  If you're paying 10K you expect it to be pretty near perfect, but for 5k there is more room given for error.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
    • By TravisCr
      A year or so back bought a used 2003 Polaris Sportsman 700 Twin with a plow for keeping the gravel road around the house snow free-
      I've used it for the last year and it works well- have a bit of water in the oil I started a separate thread on.

      Are there any "gotcha" on using these things with plows?
      I took off the small polaris winch and added a Warn 2500, with synthentic rope so I wasn't getting poked by the wire-
      Looking for folks thoughts on these.
    • By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • By Maddman200
      Can anyone recommend a good quailty bottm end rebuild kit for a 09 grizzly 700. I need to replace crankshaft and bearing and do not want junk quality?
×
×
  • Create New...