Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Kawasaki Prairie 700 Smoking after warm


Recommended Posts

Kawasaki Prairie 700 is the machine. It’s starts and runs but has a miss. After running it til it’s warm, it’s start smoking like your spraying for mosquitoes. Has oil in the breather also. Checked compressions and getting low 40psi both holes. I know this has a decompression lobe. Any other ideas? Leak down check? I’m guessing it pretty much has to be rings. With it blowing oil back into the breather. Normal typical sign I suppose?

Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By tomlad
      hi all first post  just found forum and the manuals / wiring diagram BIG THANK YOU
      im struggling to find the vin number on my frame? I m told left side of frame , lower, nr. in front of the gear pedal ?? haven't found it yet , is it numbers stamped on the frame or a commission plate ??
      main prob. no spark no power to coil , off to study the wiring info I've just found
      thanks again. tom
    • By NAVYSNIPER
      Has anyone ever attached a winch to the KFL 400, and if so how did you go about it the way the frame is configured??? I was going to attempt to attach a winch but seem to have a problem do to the frame configuration. Any ideas or suggestions from past experiences?
    • By oxidized_black
      these are what i have in my collection ... always looking for more
      1981 - 2008 ATV HISTORY
      1986 - 2006 Kawasaki KLF300 Bayou Service Manual
      1988 - 2002 Kawasaki Bayou 220 Service Manual
      1994 Kawasaki Bayou 220 Owner's Manual
      1997 - 2002 Kawasaki Prairie 400 Service Manual
      2003 - 2005 Kawasaki KLF250 Bayou Service Manual
      2003 Kawasaki KVF360 Prairie Service Manual
      2004 Kawasaki KFX700 V Force Service Manual
      2004 Kawasaki KVF700 Service Manual
      2005 Kawasaki KVF750 Brute Force Service Manual
      2005 Kawasaki KVF750 Brute Force Service Manual
      2006 Kawasaki KFX80 Specs
      2008 - 2009 Kawasaki KVF750 Parts Manual
      2008 Kawasaki KFX450R Service Manual
      2008 Kawasaki KVF750 Brute Force Service Manual
       
      Please visit the downloads section at https://www.quadcrazy.com/files/
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By 92BayouB
      Hey there all,
      First off thanks for the board. My Bayou 220 has survived 3 teenagers and is on its 4th now. Up until  recently it has been a virtual tank....until I decided to fix it;)
      Noticed some smoking from the engine block (not exhaust) so figured it was time for a quick top end rebuild. Now that I have it all back together, it fails to start. I've pulled the starter rope until my arm is tired. 
      So I will be as detailed as possible and hopefully get some help.
      Completed:
      -New Head gasket
      -New Valve seals
      -New piston (standard)
      -New rings (standard)
      -All new seals
      -Cleaned up head and valves (didn't do any resurfacing, as it all cleaned up pretty easy)
      -All torqued to spec
      -Piston ring gaps all checked out
      -Valve clearances (Intake: .18mm, Exhaust .20mm). Not too tight, not too loose.
      Pros:
      -Engine IS making decent compression
      -DO have spark
      -Will fire for a split second if I drop some gas in the spark plug hole and pull start. Will NOT from carb and or intake valve. 

      Timing:
      So I followed the guide of: TDC
      -Flywheel aligns on the “T” mark on the engine site hole
      -Cam gear mark aligned with the cover mark
      Seeing as this is my first time doing a top end rebuild on an ATV. Here are my questions and concerns:
      -I didn't realize (dummy me) that there are 2 TDC's. 1- Compression, 1-Exhaust. 
      How do I know if I'm on the right one?
      -Does the cam need to be aligned a certain way when put back in? I just aligned the cam gear dimple with the cam and put it in. No alignment. 
      Thanks ahead of time. I feel like I'm 90% there, but I'm missing an important step for completion. 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...