Quantcast
Jump to content

1993 Polaris Trail Boss 250 2x4 - Carb/Oil Line Routing

83BMichigan

By 83BMichigan
in Polaris ATV Forum

 Share

Recommended Posts

83BMichigan Apprentice

83BMichigan

Posted
Posted

I bought a 93 that was mostly disassembled in terms of the plastics and the carb/filters/etc.

I am not seeing a line where the oil pump would connect with the carb to mix the oil/fuel. I see the main fuel line, a side vent port, and a bowl vent port.

I did download the mega manual that was shared on here but the line routing isn't showing the specifics, it's giving generic routing.

Does anyone have a photo? It sounds like somewhere around 95/96 they changed the routing so it's difficult to find what goes where.

Any help is appreciated!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • cruteg8
      Repairing Plastics
      By cruteg8
      I was thinking about trying to repair some cracks in the plastics of a Lakota Sport i just purchased has anyone ever tried (U.S. Chemical & Plastics USC GarageTM Flexible Glaze USC-77704 it) https://www.ebay.com/itm/364866165725. i was thinking jb weld for plastic then using this as a bondo that can be sanded smooth 
    • sunn
      Excess heat from Cforce 400s muffler on Rt side rear plastics
      By sunn
      Have a high heat issue on the right side panel on my 2021 cforce 400, as complained about by the wife.
      My heat gun shows after 15 minute ride in ambient 91 deg temps;  690 degrees on front end of muffler close to entry pipe and 375 on exit side of muffler.  The right side plastic (where wife's leg would touch) was showing 175 degrees.  This is rediculous!.
      As I understand the muffler has a built in catalytic converter which obviously kicks off high heat particularly at front end of muffler, but the heat is atrocious.
      What is everyone doing about this problem?  Is there a replacement muffler to eliminate this issue?
    • kawasig
      I just bought a rare beast!
      By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • mga
      fender plastics ?
      By mga
      would the plastic fenders from a 1998 grizzly 600 fit on a 2000 big bear 400?
       

    • Chucksta
      What would make it surge the one tire? King Quad 300 "97
      By Chucksta
      So.. it a weird one.. The quad surges as you go down the road. By the looks of my tracks, it's one wheel only. High range, low range, 2 wd , 4 wd.. It just doesn't matter.. 
      You can see in the pictures the marks it leaves. That was in a straight line, with hardly any acceleration. 
      Any ideas?



COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...