Quantcast
Jump to content

Kei hin carb

Sketchy

By Sketchy
in General ATV Discussion

 Share

Recommended Posts

Sketchy Contributor

Sketchy

Posted
  • Author
Posted

Appreciate it,  I'll go a step at a time.  I agree that they were worked on before,  silicone used where gaskets should be.  What's a good cleaning fluid to use?

Gwbarm Grand Master

Gwbarm

Posted
Posted

I like Berryman Chemtool get it at any autoparts store and Even walmart they make it in a spray also, not sure if Walmart has that, but any carb cleaner will do, minimal exposure to the vacuum diaphragm on the slides and rubber parts. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Eric C
      These Bayous with No Spark.. What in the world.
      By Eric C
      I have looked at every thread I feel like, but with no resolution. Its always the same with a no spark issue: 
      Replaced CDI, 
      Replaced Pickup Coil (Pulsar)
      Good continuity from CDI to green white wire at ignition coil.
      No Pulse at ignition coil on the green white wire. (testing with test light on Pos of battery.)
      Good 12+ V on the hot side of ignition coil.
      I swapped the wires around on the Pulsar.
      The grounds seem to be good for the blk/y wires throughout bike.
      Brand new battery.
      Brand new stator and Pulsar
      Tried 2 new CDIs
      Brand new rectifier
      I get about 300 Micro A/C volts across the two wires on Pulsar when cranking.
      I am currently cleaning the connections on the rectifier because they were burnt. I am not even sure if it makes a difference because I am told that doesn't produce spark anyway and is only for charging system.
      The fly wheel looks OK, is the pulsar supposed to be connected in the direction with the metal "Button" facing towards the flywheel?
      My bike is a 1995 bayou 300, but I seem to come across same issues on web but no resolution on these things.
    • Krazo
      What are these wires?
      By Krazo
      as title states, what are these wires?   I took off the rear plastic, and right behind the brake light, these wires are all disconnected.  Not sure what they go to.  Aside from my current issue of what appears to be a bad coil (replacement ordered) the atv has run fine for me.  I just bought it this past winter and spent time replacing front end components but motor has run fine until the this past weekend.  By the looks of these wires they've been unplugged a while.  only thing I can think of is they're for trailer lights maybe....?  but i really don't know.  

    • cfauvel
      Does anyone know the difference between these two regulators (2001 quadmaster lta500F)?
      By cfauvel
      there are two part numbers that come up for the voltage regulator

      32800-44D21 model Y
      32800-44D31 model K1

      I don't know which one to get .
      how do I know what model the ATV is?
    • John Ford
      throttle cable for honda 07 trx 90 for keihin carb
      By John Ford
      i ordered a keihin carb for my 07 trx 90 and it fits nicely but the new cable they sent is way too long and i can't make it work.  the old honda cable cap [that fits on top of the carb] is too small to fit.  the keihin cap is approx 3/4 or 19mm.  honda cap is more like 1/2 in.  the keihin has a rubber boot on the cap where the throttle cable goes through . i don't know how to find the right length [most cites don't give the length].  i'm not sure how cables fit into that boot  and do i need to add the length of the boot to the cable?  the old honda cable is 28 inches total, but the cable movement is only approx 2'' which would not be enough to reach the actuator block on the keihin.  looking to find a throttle cable compatible with the keihin.  any help, please.
       
       
    • Admin
      Check Out These Dirt Bike Photos!
      By Admin
      We've got a section in our gallery just for dirt bikes, so feel free to post your photos! https://www.quadcrazy.com/gallery/category/60-dirt-bike-photos/
      Some of our member contributions:
       
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...