Quantcast
Jump to content

Recommended Posts

Posted (edited)

I’ve started to have a grinding noise on my 2016 cfmoto 500 short wheel base non power steering model ,very loud and noticeable when letting off the gas and letting it decelerate.

it runs fine under throttle like going up the trails only coming down does it happen. 
It’s in gear whether high or low and the light is on showing which gear it is in and it is fully engaged .

any info would be appreciated !!

thanl you 

Edited by Streetstock71
Misprint
Posted

I've read a few cases of the diffs playing up, and diffs are a bit famous for making noises on the over-run.

You could check all the trans and diff oils for signs of metal..  Probably just course dust/flakes. Very fine mist of metallic dust is normal, flakes or obvious metal particles.. not so.

 

  • Thanks 1
  • Admin locked and unlocked this topic
Posted

It sounds like it’s coming from more towards the front area underneath.

12 minutes ago, Gwbarm said:

Sounds like it might be low of fluid ,  noise coming from front back or engine area.

Sounds like is coming more towards the front just in front of where I sit but from the underneath 

Posted

Have you tried jacking the front up and turning the wheels, and driveshaft if possible, feeling for roughness, clunking, or movement. Try turning it backwards and forwards, and while it's up look for anything that looks like it could have been rubbing..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By jeffinotown
      Hey guys and gals. I've been working on my friends 2007 big bear IRS. Unfortunately after 3 different people got their hands on it and only made things worse every time.  After months of finding just crazy problems everywhere. I'm finally at the point we're its almost 100% !!! But I'm getting a short somewhere between the 4xW switch I believe. I managed to by searching the internet like a  fiend, got my hands on an official Yamaha wire harness for the year and make. But I don't have the numbered component list and to be honest. After hours of going through and making everything so it's  easy to reference. If anyone has a picture of the referenced components. I would be forever in your debt. I've spent hours marking up the blown up diagram so it will be easy, for any possible future repairs. Please and thank you. Here's a picture of what i have so far.  Unsealed it in plastic so oil and crap won't spill or get smudged. This damn things worth it's weight in gold.              Thanks Jeff                2007 Yamaha big bear 400 IRS.       YFM40FBW
    • By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By ATVcenter
      Hey everyone,
      I'm seriously considering a CFMOTO 600 Touring but keep hearing mixed feedback about parts and dealer support depending on where you live.
      Before I pull the trigger, I'd love to hear from actual owners:
      - How long do parts usually take if your dealer doesn't stock them?
      - Have you had any warranty work done? Was it smooth or a headache?  
      - Does your dealer provide decent service, or are you stuck doing everything yourself?
      The value proposition is hard to ignore - seems like you get 30% more features for the money compared to the Big 3. But I'm trying to figure out if the potential service headaches are worth the upfront savings.
      Would love to hear real-world experiences, especially from owners 2+ years in. What should a potential buyer know before committing?

    • By Admin
      Does anyone use GPS, whether on a device or app to record their ATV trail rides? I have been thinking about a section where our members can upload let's say a .gpx file and share their rides on a google map for others to see where there are riding areas. Not sure if this is something of interest or how much it would be used, so just trying to get an idea.
      Importing routes from files like xml, lmx, tour, freshroute, gpx, kmz, kml
×
×
  • Create New...